wishEMT Posted April 23, 2018 Share Posted April 23, 2018 Changed things up in my fibreglass 941 with a bit of the rust-oleum plasti-dip stuff and some automotive pin striping. Foam is vn with the Maltese sling I bought a few seasons ago. We’ll see how the durability goes and if it doesn’t work i’ll be back to a plain white mask. Link to comment Share on other sites More sharing options...
craig Posted April 23, 2018 Share Posted April 23, 2018 On 4/20/2018 at 10:25 PM, TheGoalNet said: He also does not have any cages left Cages can be found here. Cat eye only though. https://goalieparts.com/t/armadilla Finding a similar foam will be the fun part. And refurbing with rubatex or eva kills the value for anyone looking for a proper Armadilla. Fun project for sure. 1 Link to comment Share on other sites More sharing options...
TheGoalNet Posted April 23, 2018 Share Posted April 23, 2018 43 minutes ago, craig said: Cages can be found here. Cat eye only though. https://goalieparts.com/t/armadilla Finding a similar foam will be the fun part. And refurbing with rubatex or eva kills the value for anyone looking for a proper Armadilla. Fun project for sure. Nice! Did not know that was an Option Link to comment Share on other sites More sharing options...
BauerHockey47 Posted April 24, 2018 Share Posted April 24, 2018 Has anyone had their mask refurbished by New Image Goalie Masks? If you have, I'd appreciate hearing about your experience. I have a Bauer Profile 960 that needs some TLC. Once it's refurbished, I plan on swapping out all the hardware, most of which is rusted over, and installing Maltese padding and new backplate straps to complete the makeover. Link to comment Share on other sites More sharing options...
Mike24 Posted April 24, 2018 Share Posted April 24, 2018 Yeah I thought he stopped doing them Link to comment Share on other sites More sharing options...
Mike24 Posted April 24, 2018 Share Posted April 24, 2018 @craig thank you for posting the link to the cage. Link to comment Share on other sites More sharing options...
craig Posted April 24, 2018 Share Posted April 24, 2018 10 hours ago, BauerHockey47 said: I have a Bauer Profile 960 that needs some TLC. Where are you located @BauerHockey47 ??? Link to comment Share on other sites More sharing options...
craig Posted April 24, 2018 Share Posted April 24, 2018 10 minutes ago, Mike24 said: @craig thank you for posting the link to the cage. no problem Link to comment Share on other sites More sharing options...
jayluv54 Posted April 24, 2018 Share Posted April 24, 2018 15 hours ago, BauerHockey47 said: Has anyone had their mask refurbished by New Image Goalie Masks? If you have, I'd appreciate hearing about your experience. I have a Bauer Profile 960 that needs some TLC. Once it's refurbished, I plan on swapping out all the hardware, most of which is rusted over, and installing Maltese padding and new backplate straps to complete the makeover. usually a refurb includes the hardware, padding, etc... I didn't deal with Ray directly, but I have an Eddy Custom Kevlar that he did the refurb on for someone else. Looks brand new. Link to comment Share on other sites More sharing options...
Naz Posted April 24, 2018 Share Posted April 24, 2018 7 minutes ago, jayluv54 said: usually a refurb includes the hardware, padding, etc... I didn't deal with Ray directly, but I have an Eddy Custom Kevlar that he did the refurb on for someone else. Looks brand new. Did you buy that Custom Kevlar that was on eBay recently? Beautiful refurb job on that one. Link to comment Share on other sites More sharing options...
BadAngle41 Posted April 24, 2018 Share Posted April 24, 2018 On 4/16/2018 at 3:37 PM, AG37 said: Some great shots of my Wall mask. Unbelievable mask, I've had for a bit over a year now and its been nothing but amazing. I've taken some bombs in this thing and been run a few times and never had any ringing or any other problems. Are those Outsider Straps on the backplate? If so, how do you like them? Link to comment Share on other sites More sharing options...
BauerHockey47 Posted April 24, 2018 Share Posted April 24, 2018 (edited) 3 hours ago, jayluv54 said: usually a refurb includes the hardware, padding, etc... I didn't deal with Ray directly, but I have an Eddy Custom Kevlar that he did the refurb on for someone else. Looks brand new. Thanks for the response, that is definitely good to know. 1 hour ago, BadAngle41 said: Are those Outsider Straps on the backplate? If so, how do you like them? I would also like to know your thoughts on the outsider straps (or the like). My backplate straps are gross and need to be replaced. @craig, I am currently located in eastern panhandle of West Virginia (about an 1.5 hours from Washington DC). Edited April 24, 2018 by BauerHockey47 Add comment Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted April 24, 2018 Author Share Posted April 24, 2018 19 hours ago, BauerHockey47 said: Has anyone had their mask refurbished by New Image Goalie Masks? If you have, I'd appreciate hearing about your experience. I have a Bauer Profile 960 that needs some TLC. Once it's refurbished, I plan on swapping out all the hardware, most of which is rusted over, and installing Maltese padding and new backplate straps to complete the makeover. Ray from New Image does amazing refurbs. Last I heard he was no longer doing them though. Its been a while so maybe he has gotten back into it. He is on facebook just search for him and contact him so you know for sure. Link to comment Share on other sites More sharing options...
Mike24 Posted April 24, 2018 Share Posted April 24, 2018 (edited) @SaveByRichter35 that’s what I thought he no longer does them refurbs does anyone know what foam was used in armadilla’s? what grit sand paper is used to sand down masks? Edited April 24, 2018 by Mike24 Link to comment Share on other sites More sharing options...
craig Posted April 25, 2018 Share Posted April 25, 2018 2 hours ago, BauerHockey47 said: I am currently located in eastern panhandle of West Virginia Ah. OK. I'm in Ontario, might be too much of a pain. Does anyone in the States still refurb? Link to comment Share on other sites More sharing options...
BauerHockey47 Posted April 25, 2018 Share Posted April 25, 2018 (edited) 10 minutes ago, craig said: Ah. OK. I'm in Ontario, might be too much of a pain. Does anyone in the States still refurb? @craig, I fully expect to have to ship my mask somewhere for the refurb. The question is more turnaround and cost. @SaveByRichter35, thanks for the heads up. I don't have Facebook (I know, shocking), so I'll likely reach out through his website. Edited April 25, 2018 by BauerHockey47 add comment Link to comment Share on other sites More sharing options...
craig Posted April 25, 2018 Share Posted April 25, 2018 1 hour ago, Mike24 said: does anyone know what foam was used in armadilla’s? I believe it was proprietary. Don would know for sure. I've seen closed cell foams that look similar. But I've never seen an Armadilla in person so its hard to say. 1 hour ago, Mike24 said: what grit sand paper is used to sand down masks? Depends what you're painting it with and how much you're taking off of it. If you're using automotive paints you should follow the guidelines of the paint being used. Standard rule of thumb is get everything up to 220 grit before priming (grits used before depend on the condition of the surface), then work up to 400 grit for a single stage urethane or 600 grit for basecoat/clearcoat. All sanding after priming is generally wet sanded. Theres a bit of a learning curve with this kind of stuff if you want to do it right. It also requires special tools/equipment and consumables that most people don't have kicking around their garage. You could always do the dirty work yourself and delegate the final steps to a painter or someone in the autobody industry if you're going with a simple design. This is about as involved as it gets for a refurb. Final product will be nice if its done right though. Link to comment Share on other sites More sharing options...
craig Posted April 25, 2018 Share Posted April 25, 2018 12 minutes ago, BauerHockey47 said: @craig, I fully expect to have to ship my mask somewhere for the refurb. The question is more turnaround and cost. Look around locally first for sure. I know there used to be quite a few guys in the states that would do refurbs. I know Warwick does them. But I'm not sure if that's only their masks... or others as well. Last I looked I know Ray was done doing refurbs but was still making foam kits. That's always an option too. If you can't find anyone and would be willing to ship your mask north of the border, PM me and let me know what you're looking to have done. Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted April 25, 2018 Author Share Posted April 25, 2018 Doug Wager of Weasel Head Custom Designs does refurbs as well. He is in the Philly area I believe. 1 Link to comment Share on other sites More sharing options...
Mike24 Posted April 25, 2018 Share Posted April 25, 2018 Got any contact info?? Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted April 25, 2018 Author Share Posted April 25, 2018 13 minutes ago, Mike24 said: Got any contact info?? He's easiest to reach on Facebook. I know his website is very outdated and I've heard he is hard to get in contact via email as well. I spoke to him on Facebook and heard back within minutes. Link to comment Share on other sites More sharing options...
IPv6Freely Posted April 25, 2018 Share Posted April 25, 2018 3 hours ago, BauerHockey47 said: Thanks for the response, that is definitely good to know. I would also like to know your thoughts on the outsider straps (or the like). My backplate straps are gross and need to be replaced. @craig, I am currently located in eastern panhandle of West Virginia (about an 1.5 hours from Washington DC). Absolutely love my outsider straps! Just make sure you don't get the ones with snaps. I don't like those. Link to comment Share on other sites More sharing options...
Mike24 Posted April 25, 2018 Share Posted April 25, 2018 @SaveByRichter35 thank you Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted April 25, 2018 Author Share Posted April 25, 2018 3 minutes ago, Mike24 said: @SaveByRichter35 thank you Anytime! 1 Link to comment Share on other sites More sharing options...
BauerHockey47 Posted April 25, 2018 Share Posted April 25, 2018 1 hour ago, craig said: Look around locally first for sure. I know there used to be quite a few guys in the states that would do refurbs. I know Warwick does them. But I'm not sure if that's only their masks... or others as well. Last I looked I know Ray was done doing refurbs but was still making foam kits. That's always an option too. If you can't find anyone and would be willing to ship your mask north of the border, PM me and let me know what you're looking to have done. Thanks, @craig; will do. 1 hour ago, SaveByRichter35 said: Doug Wager of Weasel Head Custom Designs does refurbs as well. He is in the Philly area I believe. Also, thanks @SaveByRichter35. I guess I will have someone else reach out to him via Facebook because I don't have (and don't want) one. Link to comment Share on other sites More sharing options...
Recommended Posts