bunnyman666 Posted January 17, 2018 Share Posted January 17, 2018 9 minutes ago, IPv6Freely said: Should be easy to get, they were easily available at retail. I only saw cut out ones. Oh well- better news for @Big2! Link to comment Share on other sites More sharing options...
Big2 Posted January 18, 2018 Share Posted January 18, 2018 Guys sorry I meant Bauer Reactor 9000, also as far as Cowlings are concerned I can easily find them in Montreal. Link to comment Share on other sites More sharing options...
RichMan Posted January 27, 2018 Share Posted January 27, 2018 I got to see and hold in my hands both the 2 piece and one piece skates today. I have to say, I was expecting something much lighter, especially the one piece model. They pretty much fall in line with the weight of Graf and Vaughn skates. One thing I did like was how wide the toe box looked. Reminded me of my Altra and Topo trail shoes I use running in the wild. Very roomy Link to comment Share on other sites More sharing options...
IPv6Freely Posted January 28, 2018 Share Posted January 28, 2018 Yep they aren’t super light, but that doesn’t matter much. Link to comment Share on other sites More sharing options...
Punisher Goalie Posted January 28, 2018 Share Posted January 28, 2018 13 hours ago, RichMan said: I got to see and hold in my hands both the 2 piece and one piece skates today. I have to say, I was expecting something much lighter, especially the one piece model. They pretty much fall in line with the weight of Graf and Vaughn skates. One thing I did like was how wide the toe box looked. Reminded me of my Altra and Topo trail shoes I use running in the wild. Very roomy I am normally a psycho about weight, but the custom fit on my VH boot is so locked in I honestly haven’t thought about the weight once. It’s has the effect of making them feel transparent on your feet. And I’m coming from S190s which are super light. Link to comment Share on other sites More sharing options...
IPv6Freely Posted January 28, 2018 Share Posted January 28, 2018 7 hours ago, Punisher Goalie said: I am normally a psycho about weight, but the custom fit on my VH boot is so locked in I honestly haven’t thought about the weight once. It’s has the effect of making them feel transparent on your feet. And I’m coming from S190s which are super light. Exactly. When the fit is THAT much better, you don’t even notice weight. Link to comment Share on other sites More sharing options...
Kayen Posted February 20, 2018 Share Posted February 20, 2018 Going to bump this, but I wonder if the 2nd Gen VH boot was made well enough to mount a vertexx holder on? (I know Graf boots have the double thick toe cap regardless anyways) Link to comment Share on other sites More sharing options...
Chenner29 Posted February 20, 2018 Author Share Posted February 20, 2018 34 minutes ago, Kayen said: Going to bump this, but I wonder if the 2nd Gen VH boot was made well enough to mount a vertexx holder on? (I know Graf boots have the double thick toe cap regardless anyways) You will have to get the serial number off the boot and contact a True rep. If it was mounted to a cowling, chances are the answer is no. Link to comment Share on other sites More sharing options...
TheGoalNet Posted February 21, 2018 Share Posted February 21, 2018 6 hours ago, Kayen said: Going to bump this, but I wonder if the 2nd Gen VH boot was made well enough to mount a vertexx holder on? (I know Graf boots have the double thick toe cap regardless anyways) I saw a Vetexx Edge & VH combo in the wild and it looked good. I can’t speak to the Step performance, but some reason the Vertexx looks nicer to my eye. Similarly to a Tuuk always looking nice as a player holder Link to comment Share on other sites More sharing options...
ULTIMA Posted February 21, 2018 Share Posted February 21, 2018 Anyone know what happens when the "holder" or "cowling" part of their one-piece skate cracks? What options does one have? Link to comment Share on other sites More sharing options...
Imperative Posted March 24, 2018 Share Posted March 24, 2018 @ULTIMA I think on the true one piece you have to send them back for repair. Link to comment Share on other sites More sharing options...
Chenner29 Posted March 24, 2018 Author Share Posted March 24, 2018 On 2/20/2018 at 9:07 PM, ULTIMA said: Anyone know what happens when the "holder" or "cowling" part of their one-piece skate cracks? What options does one have? You can fix it yourself if you're familiar with composites. I think there was a thread on GGSU where a guy did it himself. You can also send it back to True. Link to comment Share on other sites More sharing options...
ULTIMA Posted March 25, 2018 Share Posted March 25, 2018 On 3/23/2018 at 11:52 PM, Imperative said: @ULTIMA I think on the true one piece you have to send them back for repair. 10 hours ago, Chenner29 said: You can fix it yourself if you're familiar with composites. I think there was a thread on GGSU where a guy did it himself. You can also send it back to True. Send it back past the warranty date? I dunno about that. Link to comment Share on other sites More sharing options...
Chenner29 Posted March 26, 2018 Author Share Posted March 26, 2018 21 hours ago, ULTIMA said: Send it back past the warranty date? I dunno about that. Another suggestion is to poke around locally, see if you can find a shop that works with composites. Link to comment Share on other sites More sharing options...
Imperative Posted March 29, 2018 Share Posted March 29, 2018 On 2018-03-25 at 1:08 AM, ULTIMA said: Send it back past the warranty date? I dunno about that. I wouldn’t go with the one piece for that reason, if the holder breaks on the two piece just buy a new one. Link to comment Share on other sites More sharing options...
Chenner29 Posted June 10, 2018 Author Share Posted June 10, 2018 So we're a hair over 6 months in, I thought I'd chip a quick update. After working with a weird groin tweak in my right leg over the last couple months (I initially thought it was a groin pull), and a strange feeling in my kneecap I brought my skates to a local guy who's done some work for some of the Ducks (he humble-brags all the time that Kariya and Friesen would send him skates and steel to work on after they left town). He took one look at my right boot and saw that the bottom is actually sloped upwards as it approaches the outside of my foot. He posited that it's possible my right leg is simply overworked from being constantly engaged on my inside edge and having to roll my ankle and knee a touch farther out to get square on both inside and outside edge. I used a stock picture below to illustrate; the angle of the slope is very exaggerated. He ended up taking the holder off, putting a thin piece of rubber (maybe 1/16" thick) on the outside part of the holder and remounting it to balance it back out. This does bring up a salient point, why aren't the bottoms of these skates flat? I can understand wanting to match the contours of the bottom of the foot on the inside of the boot, but I think without a completely flat outsole, some people may encounter issues like I have. I don't want to start a dumpster fire on True here; there's plenty of instances of skates being mounted incorrectly from the factory with other manufacturers. Moral of the story: Check your outsoles and your mount job! Link to comment Share on other sites More sharing options...
Urabus33 Posted February 19, 2019 Share Posted February 19, 2019 On 6/10/2018 at 2:22 AM, Chenner29 said: So we're a hair over 6 months in, I thought I'd chip a quick update. After working with a weird groin tweak in my right leg over the last couple months (I initially thought it was a groin pull), and a strange feeling in my kneecap I brought my skates to a local guy who's done some work for some of the Ducks (he humble-brags all the time that Kariya and Friesen would send him skates and steel to work on after they left town). He took one look at my right boot and saw that the bottom is actually sloped upwards as it approaches the outside of my foot. He posited that it's possible my right leg is simply overworked from being constantly engaged on my inside edge and having to roll my ankle and knee a touch farther out to get square on both inside and outside edge. I used a stock picture below to illustrate; the angle of the slope is very exaggerated. He ended up taking the holder off, putting a thin piece of rubber (maybe 1/16" thick) on the outside part of the holder and remounting it to balance it back out. This does bring up a salient point, why aren't the bottoms of these skates flat? I can understand wanting to match the contours of the bottom of the foot on the inside of the boot, but I think without a completely flat outsole, some people may encounter issues like I have. I don't want to start a dumpster fire on True here; there's plenty of instances of skates being mounted incorrectly from the factory with other manufacturers. Moral of the story: Check your outsoles and your mount job! From my limited understanding of skate remounting (only about a year-ish experience), the little black shim on the heel, and the way the toe cap wraps around under the holder in front is to assist in flattening the holder and give a level mounting service. The true rep at my local shop informed they have the ability to make the skates even more contoured to the foot but it would make mounting even more difficult. Link to comment Share on other sites More sharing options...
Chenner29 Posted February 19, 2019 Author Share Posted February 19, 2019 3 hours ago, Urabus33 said: From my limited understanding of skate remounting (only about a year-ish experience), the little black shim on the heel, and the way the toe cap wraps around under the holder in front is to assist in flattening the holder and give a level mounting service. The true rep at my local shop informed they have the ability to make the skates even more contoured to the foot but it would make mounting even more difficult. I was not given the black shim. Link to comment Share on other sites More sharing options...
Mroy31 Posted February 19, 2019 Share Posted February 19, 2019 On 6/10/2018 at 2:22 AM, Chenner29 said: So we're a hair over 6 months in, I thought I'd chip a quick update. After working with a weird groin tweak in my right leg over the last couple months (I initially thought it was a groin pull), and a strange feeling in my kneecap I brought my skates to a local guy who's done some work for some of the Ducks (he humble-brags all the time that Kariya and Friesen would send him skates and steel to work on after they left town). He took one look at my right boot and saw that the bottom is actually sloped upwards as it approaches the outside of my foot. He posited that it's possible my right leg is simply overworked from being constantly engaged on my inside edge and having to roll my ankle and knee a touch farther out to get square on both inside and outside edge. I used a stock picture below to illustrate; the angle of the slope is very exaggerated. He ended up taking the holder off, putting a thin piece of rubber (maybe 1/16" thick) on the outside part of the holder and remounting it to balance it back out. This does bring up a salient point, why aren't the bottoms of these skates flat? I can understand wanting to match the contours of the bottom of the foot on the inside of the boot, but I think without a completely flat outsole, some people may encounter issues like I have. I don't want to start a dumpster fire on True here; there's plenty of instances of skates being mounted incorrectly from the factory with other manufacturers. Moral of the story: Check your outsoles and your mount job! I'm gonna have to give mine a check. I've had a weird issue recently where my left foot just feels very wobbly, and the most recent skate I noticed it felt like I was skating on my toes most of the night, then woke up with the weirdest groin (maybe) strain in my left leg. Thought it was just a lacing issue since I don't need to tie my 2S as tight to lock my foot in place, but I also noticed just standing straight up that it feels like the heel of my left blade just wants to slip out. Link to comment Share on other sites More sharing options...
Chenner29 Posted February 19, 2019 Author Share Posted February 19, 2019 1 hour ago, Mroy31 said: I'm gonna have to give mine a check. I've had a weird issue recently where my left foot just feels very wobbly, and the most recent skate I noticed it felt like I was skating on my toes most of the night, then woke up with the weirdest groin (maybe) strain in my left leg. Thought it was just a lacing issue since I don't need to tie my 2S as tight to lock my foot in place, but I also noticed just standing straight up that it feels like the heel of my left blade just wants to slip out. Without seeing them, I’d guess the holders were mounted pigeon-toed on your left skate Link to comment Share on other sites More sharing options...
Mroy31 Posted February 20, 2019 Share Posted February 20, 2019 7 hours ago, Chenner29 said: Without seeing them, I’d guess the holders were mounted pigeon-toed on your left skate Going to take them into the shop tomorrow. My untrained eye is probably just seeing something because I'm looking for it, but it does look like the holder is off on the left skate. The boots are slightly different sizes though, so definitely need a pro's eye. Also found a skate blade puncture (probably my own heel that did it) on the back of one boot, so don't know if that's something that will need to be dealt with. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.