Bb15 Posted October 10 Share Posted October 10 Hi, probably in the wrong part of the forum but.... I have a pair of CCM Eflex 6.9 pads and considering adding the warrior slide plates G7 on to them. Firstly will they fit on to the pads easily? Secondly, has anyone done this? Thanks Quote Link to comment Share on other sites More sharing options...
ArdeFIN Posted October 12 Share Posted October 12 (edited) On 10/10/2024 at 10:15 AM, Bb15 said: Hi, probably in the wrong part of the forum but.... I have a pair of CCM Eflex 6.9 pads and considering adding the warrior slide plates G7 on to them. Firstly will they fit on to the pads easily? Secondly, has anyone done this? Thanks Haven't tried it, but from how the slide plates look and how Warrior has used the effort to make them very product specific to their own knee block design I would say that they don't fit very good on CCM blocks. This however is also a question of how much are you willing to modify the plates to fit them. Another question is if you are able to mod them then it would be the same effort to make your own Eflex specific plates from bare sheet of plastic. It's not really that difficult if you have heat blower, plastic sheet, some cutting device, lace and some hand skills. Edited October 12 by ArdeFIN Quote Link to comment Share on other sites More sharing options...
IpaddyTECH Posted October 12 Share Posted October 12 Or ppf film might be faster and close to the same results. Quote Link to comment Share on other sites More sharing options...
![THE GOAL[ie] NET[work]](http://media.invisioncic.com/r274873/monthly_2018_03/logo-02.png.d6f61971ea123d3bfb039f976a1ffe77.png){kind=logo}
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.