Jump to content
Sign in to follow this  
mariodolphins1010

Warrior 2020 Catalogue

Recommended Posts

Posted (edited)

Link took awhile to load but worked. Things that stand out to me are G5 sr+ doesn’t have the “dual fit” active drop leg channel (never mind. Coop corrected me) and the G5 strap kit has two extra straps. Professor straps possibly?

Edited by ThatCarGuy

Share this post


Link to post
Share on other sites
1 hour ago, ThatCarGuy said:

Link took awhile to load but worked. Things that stand out to me are G5 sr+ doesn’t have the “dual fit” active drop leg channel and the G5 strap kit has two extra straps. Professor straps possibly?

You sure?

Untitled.thumb.png.d76047957a0e8571b334d0895dfe916e.png

  • Thanks 1

Share this post


Link to post
Share on other sites

So much good stuff!  I wish it had more info on the materials used in the mask shell.  Looks like the higher end versions have carbon fiber reinforcement, but don’t know if it’s a fiberglass shell or some sort of plastic.  If it’s the former, I’m all in - I could use a new mask!

Share this post


Link to post
Share on other sites
Posted (edited)

Pg 99 has a legpad with the profile lock in the pic, not listed as an option, assuming this was a publishing error?  G5 demo photo or photoshopped G4? Also just noticed it's on the intermediate set on page 100.

Edited by dreadlocked1
looked at next page

Share this post


Link to post
Share on other sites

Woah alot of marketing BS:

Coveredge

Airslide

RVH optimized

360 Active drop

I dont see any information supporting any of these buzz words ?

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, Big2 said:

Woah alot of marketing BS:

Coveredge

Airslide

RVH optimized

360 Active drop

I dont see any information supporting any of these buzz words ?

Coveredge: thicc

Airslide: slotted sliding surface

RVH optimized: even thicker near the bottom of the calf

360 active drop: full wrap leg channel that hangs down for quicker butterfly 

Share this post


Link to post
Share on other sites

What's with the "SR+" thing? What is the extra(S)? Couldn't it have just been simple, PRO/SR/INT/JR/YTH?

Share this post


Link to post
Share on other sites
Posted (edited)

It's the product between Pro and SR basically, so for masks, it has carbon Minimus Carbon G1000 where as the Pro has the G1200 (finer weave), and the SR does not have any.

EDIT: Oh I'm sorry you were referring to the pads exclusively. I misread that.

Edited by johncho

Share this post


Link to post
Share on other sites
2 hours ago, johncho said:

It's the product between Pro and SR basically, so for masks, it has carbon Minimus Carbon G1000 where as the Pro has the G1200 (finer weave), and the SR does not have any.

EDIT: Oh I'm sorry you were referring to the pads exclusively. I misread that.

Still applies and thanks for pointing the difference out.

Share this post


Link to post
Share on other sites
13 hours ago, Big2 said:

Woah alot of marketing BS:

Coveredge

Airslide

RVH optimized

360 Active drop

I dont see any information supporting any of these buzz words ?

Check page 97... explains all 4 of those things.

Share this post


Link to post
Share on other sites
14 hours ago, Big2 said:

Woah alot of marketing BS:

Coveredge

Airslide

RVH optimized

360 Active drop

I dont see any information supporting any of these buzz words ?

First time seeing a brochure designed to market a company's products?

You should see some of the crap that valve companies put out.

Share this post


Link to post
Share on other sites
Posted (edited)

Wonder what the price point different with Sr and Sr + with the chest protectors. As with the pads there's only regular Pro and regular Sr+ (and custom pro).

Chest protector i see it this way though:

Pro +: Pro with robocop arms
Pro: Pro with traditional arms.
Sr +: Sr Chest protector, traditional arms. (equivalent to GT2 senior protection wise)
Sr: Sr Chest protector, no belly extensions, single layer elbow floater (vs double on other models), stripped down elsewhere. 

Interested in how things do, my G1 Pro w/ CCM arms has lots of gaps, and starting to break down. 

Edited by Kayen

Share this post


Link to post
Share on other sites

here what is unclear:

• 360DualFIT ACTIVEdrop leg channel • 

Adjustable knee cradle setting

changes from g4 to g5 : hc on face of pads to HyperComp reinforced thighrise

Anyone know what foam they use in the knee stacks on the g3, g4, and g5?  

g3 knee stacks were great,

g4 were shitty as it get, some crappy bubble computer foam block with something like ld45 which wasnt bad.  overall too soft, bad mistake. Just plain aweful from day 1., g3 still going strong.

g5?

Share this post


Link to post
Share on other sites
5 hours ago, DL42 said:

here what is unclear:

• 360DualFIT ACTIVEdrop leg channel • 

Adjustable knee cradle setting

changes from g4 to g5 : hc on face of pads to HyperComp reinforced thighrise

Anyone know what foam they use in the knee stacks on the g3, g4, and g5?  

g3 knee stacks were great,

g4 were shitty as it get, some crappy bubble computer foam block with something like ld45 which wasnt bad.  overall too soft, bad mistake. Just plain aweful from day 1., g3 still going strong.

g5?

The 360 Degree Active Drop Leg Channel has been on both G4 and GT2.  It aids in filling in the 5-Hole while you're in your stance and transitioning side-to-side in the butterfly.  The new DualFit feature can be seen on our Instagram page.  The calf wrap now has two (hence DualFit) options 1: Going around leg channel 2: Going through new opening on leg channel for custom fit/feel.

The adjustable knee cradle setting is on the GT2.  There are two sets of attachments for the outer knee wing for goalies to choose a tighter/narrow or wide knee cradle.  This comes in handy for custom fit/feel but also variance for size of knee pads you wear.

HyperComp thigh rise is on G4, GT2 and now G5 for added stopping power in the thigh rise and better seal to the ice.

The AIRslide internal foams are much harder foams now compared to G4.

  • Like 2

Share this post


Link to post
Share on other sites

@Kirk3190 if you don't mind, I have a couple of questions about the stick.

1. What would be the closest Warrior size to a 24" CCM/Bauer?

2. Is the paddle grip any tackier?

Share this post


Link to post
Share on other sites
5 minutes ago, Peter36 said:

@Kirk3190 if you don't mind, I have a couple of questions about the stick.

1. What would be the closest Warrior size to a 24" CCM/Bauer?

2. Is the paddle grip any tackier?

The 23.5" and 25" both sort of straddle the 24" on the market.  Both are very close to the 24" obviously it'd just depend if you'd find slightly shorter or slightly taller a better benefit to your game.  The index finger grip is similar to the V1 line.

  • Thanks 1

Share this post


Link to post
Share on other sites

For any podcast listeners (or YouTube) give this interview I did a listen about our new G5, M1 and F1 products.  I hope you enjoy listening!

  • Like 4

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...