Jump to content

Suspenders, Belts, Other? For Pants


Recommended Posts

Idk how anyone uses the internal belt while tucking. I have tried it several times and the belt keeps pushing my chesty up and won’t let it sit flush on me. Using premiers and a passau pro pack I had to ditch the belt and just use suspenders. 

Link to post
Share on other sites

Warrior X2 pants with a McKenney chest protector tucked in - I use the internal belt to get the pants a bit higher, but also suspenders (Kenesky, which are great) over the CA because I like everything to feel like one unit. I'm sure i lose a little coverage that way, but the comfort/mobility makes a big difference.

Link to post
Share on other sites

Before I went with a Kova setup I used to always wear the run of the mill A&R suspenders.  The elasticity lasted longer than the anchors.  I found myself buying a new set 3 or 4 times a year because the rubberish plastic anchors always broke.  I think I have one or two barely used suspenders now that have the good anchors from previous broken sets.

Link to post
Share on other sites
On 6/27/2020 at 7:01 AM, SaveByRichter35 said:

Before I went with a Kova setup I used to always wear the run of the mill A&R suspenders.  The elasticity lasted longer than the anchors.  I found myself buying a new set 3 or 4 times a year because the rubberish plastic anchors always broke.  I think I have one or two barely used suspenders now that have the good anchors from previous broken sets.

I had the same thing happen to me. The anchor straps are made out of weird plastic that is flexible but still rigid. I had one anchor break on me during a game when a shot hit it. 
 

picked up some nova and like them so far along with floater straps. 

Link to post
Share on other sites

This is how I tuck with internal belt.

IMG_20200523_182555.thumb.jpg.6cb44fd3050058da1b0efe5e05fca58c.jpg

The flap is not connected to the front lacing now and chesty tucks to that space between. And stays there with front and rear ties made of rubber cord. C/A makes a sort of suspenders this way. 

Before Warriors I had CCM Premiers this way but they didn't work as good as this setup. I had that odd feeling of chesty pushing out of pants. Which actually never happened.

Axis pants seem to have more waist lift that I think would work well with tucking chesty and using internal belt.

Link to post
Share on other sites

If you have warrior pants and a warrior chest protector this is an included option

BED249D0-32FC-447E-982C-459C92056113.thumb.jpeg.673af128f02b489912027fc7d218b534.jpeg

You can also do this when untucked because of the loops on the inside of the chest protector. 
If I can find the picture I’ll add my modified internal belt. Basically it’s only connected to the pants in the back like ccm pants and the belt is independent in the front

Link to post
Share on other sites
51 minutes ago, ArdeFIN said:

This is how I tuck with internal belt.

IMG_20200523_182555.thumb.jpg.6cb44fd3050058da1b0efe5e05fca58c.jpg

The flap is not connected to the front lacing now and chesty tucks to that space between. And stays there with front and rear ties made of rubber cord. C/A makes a sort of suspenders this way. 

Before Warriors I had CCM Premiers this way but they didn't work as good as this setup. I had that odd feeling of chesty pushing out of pants. Which actually never happened.

Axis pants seem to have more waist lift that I think would work well with tucking chesty and using internal belt.

That’s pretty slick, I have premiers right now and the same thing is happening to me as it did to you. If I trie to use the internal belt the side of the chesty rests on the connecting straps and doesn’t go down flush but kind of just sits on the belt and when I bend Over the chesty rides up 

Link to post
Share on other sites
  • 1 month later...
On 6/29/2020 at 4:50 PM, ThatCarGuy said:

If you have warrior pants and a warrior chest protector this is an included option

BED249D0-32FC-447E-982C-459C92056113.thumb.jpeg.673af128f02b489912027fc7d218b534.jpeg

You can also do this when untucked because of the loops on the inside of the chest protector. 
If I can find the picture I’ll add my modified internal belt. Basically it’s only connected to the pants in the back like ccm pants and the belt is independent in the front

I have exact setup pant / ca but rgt2 , where do you get this type of plastic buckle ? I found alot but none like this to attach to pant 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 17 Guests (See full list)

    There are no registered users currently online

  • Member Statistics

    1,439
    Total Members
    2,646
    Most Online
    Gardenstatepwky
    Newest Member
    Gardenstatepwky
    Joined
×
×
  • Create New...