RyanR3KC

Ville Husso to Detroit Vitek Vanecek to New Jersey

Queue the Aliens jokes and memes MARINES…WE ARE LEAVING

I have Hyperlite. You shouldn’t need 3M tape for sliding edge

You should read Chenner’s post on L20.2. Good info there and also breaks down all the updates.

I’m Full Right. 580 break, God’s break

The only break in my game ready L20.1 required was running hot kitchen sink water inside and outside the glove for 1 minute each. If it sits too long between games and feels stiff, I’ll run the water on it again. Too easy

Chenner… Solved the issues on my 20.1. Dennis from Factory Mad made me a rigid nylon Velcro strap to replace the elastic knee block stock strap. Increased stability with the floppy knee block, keeps the pad face from leaning forward or flopping down in a slide and eliminates the boot break gap Sliding and responsiveness improved drastically. $20 for the straps. I highly recommend this mod or ordering the behind the knee leather strap. Awesome customer service from Dennis

My Bauer Hyperlite and Lefevre 20.1 are both outstanding gloves.

Thanks Chenner. I’ve had to mess with the strapping a lot on the pad. The knee blocks are a lot more floppy on the 20.1s than anticipated. if I was to reorder them again I would opt for the leather strap behind the knee to prevent the pad face from leaning forward.

Is the sliding edge in front of the knee block on the 20.2 completely squared out or does it angle like the 20.1? I think this is what causes the 20.1 to lean forward.

I applied the 3M tape on my Lefevre L20.1s. I ordered them with the Weave on the sliding edge. Before the tape I was having issues with sliding and getting the strapping dialed in to prevent under rotation of the pad. I also experienced the pad face flopping down to the ice while starting a slide which was very odd. My Bauer Ultrasonics flat out perform better. skated in a pick up scrimmage on Monday night and the tape works. Quick sliding and I don’t feel like the pad is working against me. Long and easy slides with gentle pushes. I do wish the Lefevre’s had Bauer’s integrated knee block for better overall stability.

Any specs on the Mach that can be shared/hinted at yet? TGN mentioned wearing a mixed Hyperlite/Mach set in the Hyperlite Glove and Blocker review

I went Black and Red for my colors on this set. I went Black Weave on the sliding surface Full Right. 580 break on Glove

Unfortunately did not have the chance to compare on skates

Credit goes to Rance for the pics. Those are what he sent me from the shop. when I measured myself I was in the 33 size zone but took into account that Lefevre sits up higher and my knee hits dead center on the Bauer 2X

Ordered L20.1 last week through Rance at the Goalie Crease. Can’t stress enough to measure yourself before ordering. I was in Large Bauer 2X Pro (35+1). Ordered 32 + 2.5 in Lefevre. I’m 6’1” and FTK is 21.5 I was amazed how a 32 in Lefevre lined up to the knee block and sliding edge in a Large 2X

Hehe. That whole weight argument cracked me up. Literally...if you’re Whinging over ounces...you need to get in the gym.

Ordered a set yesterday. The wait begins.

Ok. So are you more of a 600 break, index finger tip to Thumb tip guy? I read your thread on your True Design Vapors. So that set is gone? Damn

Did the break in on my Bauer 2X Pro and it feels great. Relaced the pocket with skate lace and loosened the double T a little and that was the last piece of the puzzle. I wonder if a lot of these companies lace their gloves too tight from the factory? what have NHL equipment managers said on any of this?

I see Tune Fit and a calf pillow on the inside of the pad for better seal to the ice similar to what’s on the Brian’s Optik 2

Hopefully more curve options for us Full Righties

Exactly. When’s the release date?

Pulled the trigger and went with 2X Pro. Rance from the GoalieCrease was a huge help. Pads should be here hopefully mid-April. 1st custom set. Really excited

Any change to the materials on the sliding edge?