Jump to content

indykrap

Members
  • Posts

    198
  • Joined

  • Last visited

Everything posted by indykrap

  1. Trying out the half-tuck lately - belly gets tucked and tied, suspenders tucked under shoulder floaters, and sides flaps over top of the pants. Just did it at a slow-paced skate last night and it was pretty good - kept all the mobility/unity of full tuck but a bit bigger presentation. I also found my arm-to-body seal was better. Trying it again tonight and will report back, though! (using GT2 chesty and pants)
  2. Thanks! Yeah - the tech wise is something I'm not too concerned about, more the quality and customization. That's good to know. My main concerns were sliding and rebounds from what I've heard, so I appreciate hearing that.
  3. I've been trying to create a better routine know, and with ice twice a week I can usually find two gym days a week. Been doing this full body split and it certainly gets the job done. (from The Full Body Workout Routine: 2, 3 & 4-Day Split (Programs Included) (aworkoutroutine.com))
  4. Hope this captures it - the internal belt on my Warriors velcroes to the "butt pad" on the middle of my pants, and then runs a nylon strap with a triglide through a loop in the middle of the hip part of the pants (both sides). The front flap of the pants has two nylon straps in either direction that connects to the triglide and is what you would pull on to tension it. I don't use it (prefer suspenders) but it's pretty effective and holds up.
  5. Middle of the pack between the GSX and Hyperlite/Mach/Shadow. Then there’s the Supreme Pro but that’s a different beast. I had the same impressions as you @RichMan - seemed decent, but I had the sense I’d need to beef up a few spots. Looked cool but I didn’t feel like it would improve on my GT2, so I’d rather save up a bit longer and get the top end.
  6. Thanks @ilyazhito! looks like there’s been quite a run on these lately - wonder if I should call Cam and ask for a cut. https://www.thehockeyshop.com/products/bauer-gsx-intermediate-goalie-stick?variant=40249007571010 They do seem well stocked most times though so keep an eye out.
  7. Interesting! Is this one of those "this year's low-end model is yesteryear's pro model"? I mean, NXG being quite a few years back now.
  8. Let's see here: 1- did not really notice, honestly! 2- got mine for $135.59 CAD shipped from The Hockey Shop in BC, which has lots of colour options 3- from the shots I took I didn't feel any noticeable vibrations, and these guys can shoot pretty hard. I'll update here after I've taken a few more reps with it though. 4- trick question. Peregrine Falcon overall, and in air (incl. diving), Cheetah on land, Sailfish in water 5- 4366km (2713 in freedom units), 4046km land and 320km water 6- laugh out loud lots lollingly winky big smile ask me a hard one next time, @RichMan.
  9. Hey all, Thought I'd post some early impressions on my new GSX stick (pictured on the right). I've definitely been in need of a new one since my beloved 3X went soft on me (left in the picture). I thought about springing for the Elite but my upcoming nuptials mean every dollar counts. In short, I'm a big fan! It's very, very well balanced - a few guys on my team said it felt lighter in the hand than their (obviously lighter) player sticks, but more importantly it feels solid and stable in my stance. Great puckhandling with the P31 curve which gives it a nice lift on clearing and handling when you want it. Stick saves came off nice and hot and ramped up into the corners. I also like that it doesn't have any kind of grippy material, which I find on other sticks interfered with my Warrior G5 blocker so I usually sanded off. I like a bit of grip that I use tape for but keep the rest smooth as I love a good poke check (who doesn't!). Size-wise, I'm 6'0 (all torso) and use a 24" intermediate stick. I made this change on recommendations from a lot of people from a 26" a few years ago and haven't looked back. I have a Warrior 25" (M1 SR+) and the size lines up more or less. Durability will of course need to be assessed over time, but if it's anything like the 3X I should be able to get at least a year out of it playing twice or more a year.
  10. You gotta treat yourself sometimes, y’know?
  11. Hey all - anyone using the new Kenesky stuff? Either the K2015 or Legend series. Mulling my options for the next set and they're local to me, so I was thinking it would be a good option. Seems like a solid product but no idea how it is on-ice.
  12. Not the prettiest setup, but it works. My post-game routine is: Spray everything down with Febreze antibacterial Skates, glove (propped open), blocker, knee pads, and neckguard go in the rocket dryer Mask gets a wipe down, back straps get a wringing out with paper towel, mask is laid down in the middle rack with opening facing out (for airflow) Pads laid down as pictured Chesty and pants hung up for maximum airflow on the internals Fan on full blast on mask, pads, chesty, pants Laundry (base layers, socks, jersey, sweatband, towel) goes in once everything is hung up and going. Usually throw in whatever's in the laundry bin as well for bonus points with the GF Once laundry is done in the dryer (~2hrs total), chesty and pants go in the rocket dryer and runs overnight Glove gets tied shut with a softball in the pocket till the next game Everything stays hung up where it's at until the next game Most hands-off and effective approach I've ever taken, and tucked in the corner of the basement so it's out of the way. I'd love to get the full stall rocket dryer or an equivalent but they're expensive and this works fine enough for me and I can have fresh gear the next day.
  13. @RichMan how tight do you keep your calf wrap? I'm in G5s and had better results having it tighter than I thought I needed it, and I've got big calves as well.
  14. I use Febreze antibacterial when I get home and then throw it in the rocket dryer (gloves, knees, neck, skates) and a fan on pants/chestie/mask. Seems to work well and manage the stink
  15. indykrap

    Pre-Curved Pads

    Makes sense. I really really like the idea of a stiff pad with that aggressive curve, so that’s definitely helpful to start narrowing down options.
  16. indykrap

    Pre-Curved Pads

    Just curious - do Brian's mid-range line not have as aggressive of a pre-curve? Comparing Optik x3 (mid-range) to Optik3 (top line) online and it seems pretty noticeable, but it's just online photos so I'm not sure. the first pads with the primo are the Optik3s and the white are not.
  17. Thinking it over I'm probably just going to sew a layer on top of the existing flaps instead of a new one. I really like the existing mobility and think that one that snuck through was more of a one-off (and is a very covered spot normally).
  18. Same here - I run hot so I'd prefer to keep the under layer light. I'll post here what I come up with.
  19. This is the exact mod I need to make, @ArdeFIN. Took a nice shot to that open spot that gave me a big bruise, and I really don't want to get a new chestie (RGT2 is super mobile and good elsewhere) but that seems to be a known weak spot. Looking at the newer models now, they really seem to have beefed up that spot and added extra padding. I'll have to do some digging and see what I can find. Thanks for all the pics and reference material!
  20. Might just have to do more beefin’ haha. It’s otherwise a great unit
  21. Nice inside arm one that I caught on a 3 on 1 (stopped it, at least?). I’ve beefed up my RGT2 Sr around there but it may be time to consider an upgrade. Some of the guys at this skate can really shoot.
  22. Hey all, I've been in Bauer Vapor x900s since about 2018, and they've been a solid skate that have treated me well. However, the liner seems to be pretty worn down and they're feeling a bit soft, so I think it's time to consider an upgrade/update. Does anyone have experience with the Bauer Elites? They seem like a similar and good step that I can swap my (relatively new) Pulse TI Blades onto, which is a plus in my books. Definitely considering other options - True TF9s and maybe Konekt HF2s, so I'm open to what else people recommend for the mid-range skate lines.
  23. indykrap

    Baselayer thread

    What size are you @coopaloop1234? I've got a size large that I don't really wear if you want them. They're a bit used, but still in good shape. Right now I'm trying to find a good setup to wear over my more structured/compression shorts (Mcdavid cross compression) whenever I need the extra support. I think I basically wore out the cross compression on my Bauer core pants so I'm not really getting that extra support.
  24. indykrap

    Baselayer thread

    Good point about the bulk - I use the baselayer with the sock tabs now, but was thinking of trying something different. sounds like this would cause another issue altogether. Thanks!
×
×
  • Create New...