-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Store
Gallery
Blogs
Events
Downloads
Posts posted by Johnny Grey Jr
-
-
On 6/17/2021 at 6:56 PM, dreadlocked1 said:
My wife just laughed and said, "look it's your goalie twin!" I replied, "says the 5" nothin' mini mom...."
Wait wait, re-explain that elbow part again, not sure I understood that completely.
On 6/17/2021 at 8:35 PM, Chenner29 said:Also, I feel like there's a solid 'your mom' joke with the cow painting. I wanted to pick on a forum member here but I'll leave it alone
fuck it, how do you know @coopaloop1234's mom?
C'mon.... clearly that's a picture of my mother.... what? You can't see the resemblance? And from the looks of it, she clearly doesn't approve of my hobby as goaltender.... she practically jumped over the moon when I told her my son wants to follow suit...
21 hours ago, creasecollector said:Congrats on the new unit - Looks like an awesome C/A!
Thank you, this and my passau gear are the first pieces of gear that actually fits my body. Even my pants right now I think may be a smidge too long.
When I started playing hockey in 2012 I was using 10yo pads and gear that were handed down to me from a 230lbs goalie friend. I was barely 150lbs at the time... and still tiny as shit.... (get ready to cringe) my pants were so big that I never played with knee guards... and that was on top of me playing in a set of bauer vapor 32"+2 where my knee landed about a half inch from the bottom of the knee stack... so yeah when they say goalies are a different breed.... I apparently took that to a whole 'nother level and didn't even know how dangerous I was being in that moment.
........................................................................
I was advised to either wear my C/A everyday to break it in, or even take a hot shower with it to break it in faster....
What did y'all(yeah I said y'all) do to break yours in? And the glove, holy crap I can't get this thing to crease on my palm. I have an int/pro rbk lefevre blocker and trapper I bought used that fit my tiny hands perfectly and are perfectly broken in from its previous owner. It snaps open and closed with ease and I keep opening and closing my passau trapper over and over for over 2 months and it's still as stiff as the day I got it. I can press it all the way open but then when I close it, I can't get out back open without pressing it against my blocker or pant leg. I could always get a stronger grip, but what do I do? Hand in a bucket of rice? Hand/grip squeeze thingamabob?
I do stick my kids plastic bowling ball in the webbing and tie it shut with a skate lace when not in use.
- 1
-
3 hours ago, tubby34 said:
If thats the only issue why they wont take them back, I'll ship you my brand new removed inner belt liner for yours. I never used it but it'll be good to keep around. you can find me on twitter @tubby34 , might be more reliable to contact me.
I no longer shop through goalie monkey because of this incident. I have already returned them and they sent them right back to me, so I don't think I can send them back yet again with a different inner belt. There literally isn't anything wrong with it other than that little snag in the photo
-
1 hour ago, coopaloop1234 said:
I don't think that's sitting low at all?
It shouldn't be super high up on you when standing, especially without any pants on. C/A's are going to ride up a bit when you're crouching and you don't want the C/A to bunch up too much where it pushes against your mask.
Saying that, it looks like adequate coverage as it currently is and I wouldn't fret about it too much.
I wish I could wear it just a smidge higher but that back spine piece starts sticking up. Also need to try and take out the inner belt and see if it fits better when tucking because I cannot wear it over my pant and it currently pushed up on the bottom of my mask at times
1 hour ago, chile57 said:Depends on your CA and/or your pants. Some pants have a loop in the back that you could connect to (sometimes the "hanging" loop for drying out ones pants). You could also attached the "U" part of a pair of suspenders to make a loop for you if you only have rivets/buttons. Some folks use a carabiner or other assorted link to make this connection too.
Sorry - don't have any pics of these scenarios as I tuck and go over the top with my suspenders.
Also respect to whatever littler person is rocking the Spider-Man hoodie.
I will inspect tonight and buy a couple of key rings/ carabiners and experiment.
Also that would be my Spiderman obsessed son lol
- 1
-
I've never connected the rear of the unit to my pant. Where would that connection be on the pant?
-
Bought this not too long ago trying to save money on buying a new unit, however, I realized there was no elbow protection and thus it has been hanging in my gear locker for a few months now.
Selling for $65.00 (US)local pick up or buyer pays shipping (for extreme shipping fees I can lower price)
Helena, MT
-
Wasn't sure where to post this, new or used but goalie monkey refused to take these back as a return because of a snag in the inner belt system fabric.
They are brand new never used on ice, literally just tried them on a few times to see that they were indeed too big for me.
I bought them for $186.98 (US) and selling for $180.00 (US) and depending on the shipping to your destination I may lower the price a little.
Helena, MT
-
On 6/8/2021 at 10:08 PM, dreadlocked1 said:
Congrats on your purchase! Please post pics and any special order requests/mods if you got any. I ordered from the old Simmons Canadian owners several times many years ago and have yet to work with new US owners. Hopefully everything goes smoothly and you get what you're looking for. I've been rocking my 995 CA since about 2009 or 2010 I believe.
A few mods I did over time: Cut out the neck protector ( I wear a Maltese combo), Sewed an internal key chain webbing at the belly button to attach to the front of my pants (I don't tuck), Added bungee cord to the rear spine guard to "fight strap" attach to my pants with a carabiner, Replace the arm attachment lacing with bungee cord, Tape all straps so they won't come undone, Removed the extra shoulder protection on the catcher arm, And I have one small piece (a Warrior G2 across the knee) of extra padding added between the shoulder floaters on the catcher side to help protect my chest and side a bit.
Mine didn't come with the beef up extra attachments for the belly and arms and I've been fine without them, although I took a shot to the belly on Sunday that stung and bruised me a bit. Since the thing is about 12 years old and still going strong, that is acceptable to me. If I could order the beef up kit, I would, but the Velcro attachment points didn't get added until the 996 model I believe. Either way, when I finally cave to replace this, I'll most likely be getting another Simmons.
You should post pics of the mods, I've never done any mods to my gear but I also haven't been playing enough to understand certain mods and why they are done.
.......................................................................
It finally came in last monday but I only last night got some time to upload pics of the C/A unit, although, I took some pics without the extra pads it fits better than the other unites I've tried thus far. Here are some pics to show how it fits on my frame.
Two things I am sort of trying to figure out are the spine piece in the rear, if I adjust the straps to fit better, this piece starts to stick up pushing my jersey up as it reaches into the back of my neck and I am pretty sure that that is not designed to go that high...
And the other thing is the glove side of the C/A unit just seems to push down on my catcher and makes it hard to hold the glove up the right way.... Any suggestions?
-
10 hours ago, creasecollector said:
I'm 5'5" and I wear a pro CCM Senior Small, if that helps.
I was close to ordering one to give it a shot but I took the advice of the others and went with Simmons, my unit should be here in about 2 weeks.
I'll keep you all posted!
Thanks for the input and advice
- 2
-
3 hours ago, dreadlocked1 said:
Check Simmons goalie equipment. I've been using the 995 model for a long time. I am 5'6 and wear a senior-medium.
I will have to check them out, I also emailed brown hockey.
1 hour ago, Chenner29 said:^ This....they're a small custom manufacturer that can probably work with whatever sizing requirements you have.
Pretty cost effective ($436 US), good protection.
I had a budget of 400, thought I would have to double it with custom gear but that price range ain't bad at all!
-
1 hour ago, Chenner29 said:
No that was the first thing I checked, from wrist to wrist i am 54" but they said that should be fine with the adjustments in the arms, but like the baur, to get the size right in my arms meant interference in neck movement with mask on.
I am thinking I am going to have to get a Brown or Passau chesty custom built for me. But what do they cost? 6-700? -
15 minutes ago, coopaloop1234 said:
Funny, the arms on my 2S C/A are shorter than my GT1 C/A, and the GT1 is on the shortest setting.
Are you not able to try any C/A's on in person?
I live in Montana and the closest store that carries goalie equipment is utah, 8 hour drive. I can order stuff directly from online or order to a store, but even then the 3 nearest stores are 2 hours in either direction.
I have been messing with the way the unit sits on my shoulders and can get the arms to be shorter but now the shoulders interfere with my mask and my actual neck protector gets covered up by the bottom of the neck in the chest unit because it sits so high up now.My chest width is 15"
My neck to waist is 17.5"
Arm span wrist to wrist is 54" and finger tip to finger tip 67"
I stand 66" tall
I am oddly shaped -
To start off, I play in all 3 leagues where I live, from A-C, Primarily in A league and subbing for the others as needed.
I first got the Warrior RG5 senior plus, but it was too cumbersome and I could not really move in it. I couldn't even reach to take my mask off.
I returned that and got the Baur Supreme S29 after being told it would be slimmer and shorter, and It was quite the opposite, longer in the arms and taller overall.
I work for a living and cannot afford to just get an intermediate just for the right sizing if the padding will not hold up to the higher caliber playing style. I may have to just call it for this year and wait another year to afford a custom built one for my body. But what makes me more puzzled is the fact that in 2014 I bought a Warrior RG2 and it was a medium and yet it was just a tad bit too big for me, now all the smalls that I have tried are too big/long...Do any of you have any suggestions? Thanks in advance!
-
I just ordered a set of the pro starks because of what I've been told by other goalies on durability and quality. The ones I've ordered from passau are 30+2 and with a pro level build are also on the cheap end of custom gear. I'll definitely let you know how these treat me but they will be seeing almost daily use between 3 leagues and ice time just getting back into the groove after a3 year hiatus. Goalies are scarce around here so I'll get a lot of ice time soon enough.
Small goalie needing help finding C/A unit
in Chest Protectors - C&As
Posted
sorry for the delay, been workin like a madman. Tomorrow I will grab some pics of all my gear
Any of you do the trigger cut on their sticks? is it worth it?