Wrbsti15

7 hours ago, TheGoalNet said:

I’m about 6’2”

From memory, arnt you already on Brians? Don’t you know your size?

Sent ya a message on insta 

5 hours ago, TheGoalNet said:

I’m about 6’2”

From memory, arnt you already on Brians? Don’t you know your size?

I may have been in a pad to big with the 36. I’m also 6’2” but my ankle to knee is 19.25”, what’s yours? 

1 hour ago, MangoRhinehart said:

Love em. They are super comfy, stay in place, and are very protective.

Awesome. I talked to Sara and it’s def 8 week turnaround time. Said the gel does add some weight. Also asked about boot risers and how to attach to my brians pads cuz there isn’t lace on both sides of the boot landing. 
 

I may order with similar specs on the blocker and the offset toe bridge. 

On 9/16/2019 at 8:33 PM, TheGoalNet said:

Optik 2 

35+1.5

• Max Core

• Softest Boot 

• 84 Deg boot 

• Rotation Strap 

• Offset & minimized toe bridge (only 1 attachment point for laces)

• No outer knee flap

• No knee cradle on the back face of pad

• GNetik IV SBA/Nash knee landing 

• triple foam or thicker soft foam inside GNetik IV knee landing 

• Hard knee block 

• No boot strap 

• No heat transfer logos 

• TGN Spec Logo on inside thigh rise

 

Glove 

Optik 2

• 90 Deg Break

• Anchor T

• Black nash inside palm 

• Black nash inside T

• black Skate lace pocket 

• No heat transfer logos 

• TGN Spec logo on back of glove cuff

 

 

 

Blocker 

Optik 2

• Triple Anderson padding in front of the blocker glove and behind back side of blocker board

• SBA Grip on backhand area in blocker glove (not sure if that is stock or not?)

• Lexan inside the blocker 

• No heat transfer logos

• TGN Spec logo on backside of wrist

How tall are you? What’s your atk? 

On 9/27/2019 at 6:36 PM, MangoRhinehart said:

New PAW kneepads with gel. Got sick of warriors always sliding around, and my old PAW kneepads didnt have enough cushioning.

How you like them? I may order a pair but it’s a 8 week build time. Other option is the Passau pro knee pads 

1 minute ago, Peter36 said:

I would also like to know about the flag

Brian’s can do anything you want. I used to always order with a clover leaf. Now I use the flag. Jay or Rance at The Goalie Crease in Canada can hook you up. 

On 8/11/2019 at 1:08 AM, Aquilzz said:

By far the biggest change was adding HD foam to the thigh to make it stiffer. The stock Gens really softened up at the thigh for me...hard enough shots could cause it to bend. A stock Gen4 (and Optik to that extent) thigh can be easily bent with just a little bit of force on each end, but this thing doesn't budge. 

It's honestly like 2S Pro level of stiffness, which might actually be TOO stiff for my play style. I had asked them to make it sort of a Subzero 3 "1" break (which was quite stiff but had some flex) but it's crazy. It also added weight and made the thigh noticeably thicker than a stock Gen4. 

The Blocker foams were stiffened. I had asked for the sidewall to be stiffened with HD foam as well, but I believe they either forgot to, or they just won't put a Gen3/Heritage style sidewall on the Gen4. 

Pics...Might be a little hard to tell on camera but its more noticeable in person. 

Another change was including a nylon Y smart strap. Kind of an idea to mimic leather strapping. Same material as the nylon webbing straps you see on glove wrists.

Some other smaller changes like removing some graphics/heat transfers, adding a script logo to outer roll and glove backhand (which turned out nice), Nash Anchor T
 

Nice set. Mine are on the way. I did stock breaks did pro reenforced thigh to help break down. My other gnetik4 got really soft up top. Added primo on blocker fingers and did 1” deeper reenforced anchor T 

On 6/23/2019 at 11:57 PM, Aquilzz said:

Biting the bullet again today! Wasn't a fan at ALL of my Eflex4 set.

All the colours (non white) are weave on the Jenpro. Also have a literal laundry list of custom specs put on these!

I bit the bullet today too. Black piece at top near inside will be white tho. I also did a 1” deeper anchor t 

14 minutes ago, Aquilzz said:

That's a super nice way of doing the graphic

Ty! This was store stock and I got lucky they were my size 

New gnetik4 4 set. Can’t wait to order some custom optik2’s. Side note I have a full set Warrior RGT2 36+1.5 for sale. 

19 hours ago, Moose75 said:

Moving into the 21st century of gear with a composite stick. Yes, hell froze over and I'm trying one.

Wanted to go with a bigger paddle since I'm gonna have taller steel soon, but why is a 25'' CCM this much bigger than what I have? I always though they were 26'' lol. Looks like a 24-ish by comparison. Explains a lot.

EDIT: I just noticed it says "RIP". That's an ominous sign.

All how you measure it. I thought same thing with my warrior stick compared to my Bauer. Put them both on the back heal of the blade and see where you’re at then. 

New mask completed. OTNY X1 pro eco. Thank you to Dennis at goalieparts.com, Tim James for the powder coating of cage and hardware, and Mark at SkinFx Wraps for the awesome wrap on the mask! 

On 11/6/2017 at 2:39 PM, SaveByRichter35 said:

Don't go through that first hole.  Just cross the straps at the front of the skate, run down the side, and cross under the larger main hole.

That’s what I do 

Custom optik chesty and pants. #thinblueline #thegoaliecrease #Brianscustomsports 

17 minutes ago, BadAngle41 said:

Not sure what's giving you more HP... the FMIC... larger turbo... or the iced tea can. Either way... looks like you're pushing 500. Rebuild the drive train while you were at it as well?

603 whp on E85 Cobb flex fuel kit on mustang dyno. Has exedy triple disc clutch and DSS axles and driveshaft. 

1 hour ago, BadAngle41 said:

What about a pic or two of the 2015 WRB STI... I can't imagine you've left it stock.

Also have an all black set of optiks. 36+1.5 FLX Core double T glove

my custom Brian’s optik set with demko graphic and thin blue line flags.  Ordered from the Goalie Crease.  36+2 FLY, primo toe bindings, name embroidery, double t with 1” deep skate lace pocket and reenforced, XL Palms on catcher and blocker, primo in high wear areas on blocker fingers/ thumb.