itis121

Where did you get the poron? Mcmaster-Carr has regular poron in diffrent densities but not xrd. I found a xrd kit used for longboarding/ skateboarding.

has any one put inserts of yellow poron xrd in their mask? wanna know if the foam will compress and loose its original shape under constant use quickly. If so i might see if maltese sheets are still available for purchase.

I thought your carpet design was your toe ties lol

1X NCAA pro return, no information on the inside of the finger plastic on who's it is tho. Pro palm with supreme finger protection and strapping with sure grip linings.

ya just got the glove and just finished a game with it. I noticed that the curl did help with puck handling but was a bit too excessive on finger actuation. Just opening it up a bit will make the similar to what I'm use too. It was a prostock glove w/ a supreme finger protection and cuff. Ill see what my skate shop can do, the glove was cheap but came with a rip on the T.

Is it possible to bend back the finger curl on a 1x glove due to the curve in it? Or it's something I can get Factory Mad to fix?

Another question would a sportsmask mage cage fit any of the old SK helmets?

does anyone know what actually causes the ringing when you get shot in the mask? Is it the foams that push up on your ear that causes the noise to directly travel to it?

I got x900 and tie them tight. Sometimes not tight enough and have loose ankle every now and then. You can always use tape like Biron lol

What size are they?

What is kipper spec? Just curious to know.

Got pink vinyl cutout today at work using some scraps. Thinking of swapping the orange

I found that that the nme fit 3 leaves a noticeable backplate gap compared to a profiler m/l. But then again I have a big head

Does anyone know if the liner or shell changes between bauer NME fits? I think this has been asked before but can't find it.

I picked up some pro stock Merrick Madsen Harvard pants from sideline swap. Also a warrior swagger pro from Kijiji to tryout new grips.

I'm wanting the need to experiment with different paddle grips. Would a swagger pro LTE be a good stick to try out. Im coming from bauer 1s

The explanation I got was that there was only about a 15° change between the index and the thumb and about a 4° at the palm when getting different glove break (between a 60° and a 75°).

Yesterday was a long day but if I recall properly they are manufactured in Canada. The pads are surprisingly light, the thigh rise is a bit bulky in comparison to G3 and SLR's i have demoed previously. I have tried their flat face 35+1 and 34+1 pads and couldn't get the pads to sit on my foot like my Bauer pads do, resulting in my leg sliding down the pad when going down in butterfly. This could me addressed by a boot strap and a different boot angle. The catcher only comes in a 60 degree break for both the two and single piece cuff, the reason i got was that their manufacturer thinks that glove breaks are only just a gimmick. I found the blocker a bit too bulky than my current one, but offer both a binding and bindingless options. hope this helps!

I got the opportunity to demo these pads. I believe @TPSH_Goalie was there as well or someone with one of his shirts was at least. Ill try to make a write up the gear.

lol i had the same problem when upgrading my vapor x:40 (which broke) to a 1s. I just adjusted my game/ stance rather than moving back to my backup vapor xx. In comparison to the 1s, the vapor xx was too heavy.

lol to me that kinda sounds like Bauer from what I've been told about their costumer support . I've been also told by Bauer that zipper teeth falling out isn't regarded as "manufactures defect". I also went to my pro shop to ask if they could contact their rep for some help with a new zipper at least, they said the same thing to them. It doesn't help that almost all of my gear is Bauer, never had problems with them until recently.

I found xl 2s pro returns with 1x strapping on sideline swap. I don't know if it was stated previously but will custom strapping be available to consumers? https://sidelineswap.com/gear/hockey/goalie-leg-pads/408998-bauer-vella-2s-goalie-pads

Is it opaque vinyl? I use scraps whatever I have at work. Usually Avery transparent and translucent vinyl.

After the 4th attempt to get this vinyls on I finally got it to curve on the ridges just right. I'm still debating on what the side graphic should be.

OK thank. Saw a pair of prostock, the lack of colour was a bit misleading & the seller told me that they were supremes. I'll probably get some 1s on sale then