-
Posts
234 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Store
Gallery
Blogs
Events
Downloads
Posts posted by thebigm
-
-
I am curious on if you change the boot angle from regular to open if it will affect the size? I have my Fleury tribute set ready to go once I figure this out (aka waiting for my rep to get back to me lol)
-
Vaughn SLR 3
in Gear
On 10/25/2022 at 11:21 AM, coopaloop1234 said:Which is strange since I found the C/A's I needed to up a size for the same fit.
Who's their sizing guy? lol
Not too sure! I wear a large body medium arms with them. That's my size though for a bunch of companies.
-
Vaughn SLR 3
in Gear
Alright so something I learnt with my pants coming from a CCM large. You need to get smaller legs in the Vaughn pant. The legs are an inch too long. So I need to re-order my pant after waiting 6 months to get them
-
-
On 11/13/2021 at 10:18 PM, segfault said:
an option for +x on the thigh rise would be nice
that I have wanted to and been talking to my rep and goalie guys from Bauer I believe it's gonna happen in 2023
- 2
-
On 3/4/2022 at 9:24 AM, AdamL said:
Thanks @Chenner29 for the shoutout.
With regard to hotter rebounds, @thebigm made a thread quite awhile ago about his custom order VE8 set. In that thread he mentioned he had the pad layered like the SLR pads with the carbon on the face of the pad rather than presumably behind a layer of foam. I don't know the specifics of what that involves or if Vaughn still does the SLR3 that way, but I asked for that option, and let's just say the rebounds are still meh. If you're after really hot rebounds, just ignore the Velocity line.
If I was trying to replicate a V3 pad, I would FOR SURE spec the soft scoop/boot. I went with the stiff thigh rise and stock boot, and the boot isn't anywhere near as soft as what was used for the VE8s. If you look at photos of the VE8 in use, the boot looks like it might as well be off of a V3 pad they way it bends over the skate when it's loaded up. The stock boot on the V9 is nowhere near that soft, or as soft as something like the EF4. It doesn't twist really at all, but vertically it does have some compliance. If I was ordering these over again I would have gone with the soft boot and asked to see if they could do a flatter boot channel.
This dude's V9 set is probably as close as you could get to the feel and playability of a V3.
What I found out the V9 pad is what I did with my V8s according to my rep. The rebounds aren't as hot as some pads, also only wore them for about 6 month before they were sold lol.
-
Vaughn SLR 3
in Gear
I also just placed my custom SLR3 pant order I've been wearing pretty much every version of RBK/CCM pant since 2006.
My specs are as follows:
Size Large
Pro logos and ghosted I like the clean look.
Leather tabs for suspender buttons instead of having the buttons on nylon loops got that idea from @ZeroGravitas
Also had a carbon insert put on the inside of the thigh for extra protection. Trying to replicate my Pro stock CCM pant.
I am also excited to try something new. I fell in love with them when my rep brought the sample by!
- 2
-
On 2/9/2022 at 12:34 PM, A.YOUNGoalie13 said:
Same question here…
Also, why another 590? Almost every brand offers one already plus a 600ish break. They are the perfect people to start offering a retail 580 or something else. They might as well try setting themselves apart in a way other than year long custom wait times.
Because it is one of the most common and well like glove closures. If you did a 580 you would only be hitting a minor group of people. Manufactures build for the masses not us super picky people lol.
-
On 1/30/2022 at 4:09 AM, Chenner29 said:
Supposedly retail stock gear will be manufactured in Asia and in stores by April/May
The stock gear will be made overseas with "same" quality as they produce in Canada.
On 1/30/2022 at 9:28 AM, Peter36 said:That’s good news, any info on sizes and colors? Hopefully the quality is good.
Colours are: White, White/black, White/red, White/royal 33-35 all with a +2
- 1
-
On 4/9/2021 at 10:43 PM, AdamL said:
Backhand shot. Looks like a Velocity glove. One thing I do think may cause some issue is the aerospacer portion of the cuff. It contacts my forearm some when I present the glove even without my C&A on, I do worry it might be slightly restricting, but time will tell.
I had the exact same issue with my VE8 glove I actually took my seem ripper and took it off and re-stitched the trim back on. Did it wall by hand but it gave way more mobility. When you order the glove you can ask for that piece to be removed.
-
@A.YOUNGoalie13 You can buy just the replacement holders as I have ordered several for myself and some for customers. If you need some holders and steel shoot me a PM and I can get some for ya.
- 1
-
On 2/20/2021 at 1:22 PM, SaveByRichter35 said:
The stock CCM blades are 3mm but Step does make fat blades for the XSG that is a 4mm blade with the top notched out to fit the 3mm holder. I have them and so does @BadAngle41. We both got them from @thebigm.
I also use the XSG holder I had them on my custom Graf skates and my True skate now as well.
Stock CCM steel is 3mm like SaveByRichter35 has mentioned with Step offering a 4mm which is called XSG FAT.
@RichMan The holder will fit as long as you get the right holder size. They may have to drill a new hole or two to have the new holder fit properly which is common when switching between brands.
-
On 11/28/2020 at 8:35 PM, mikemc620 said:
can you take pics of the added padding?
-
-
Alright I am gonna chime in as I may have been one of the first few people to do it with a cowling less holder on a graf.
Speaking with the builder Shaun at Graf. The toe caps haven't been changed in many years, but They are also have very thick toe caps. I have taken some off the toes you know it hit you but doesn't hurt.
-
On 7/31/2020 at 6:52 AM, Deltadre said:
I can’t seem to find them anywhere. I’m hoping soon though.
I have them in stock if you want to shoot me a message
-
On 6/9/2020 at 2:03 PM, TheGoalNet said:
I do understand if you don't feel comfortable trimming it at home, but this is designed to be "trim to fit" where you can tweak the pieces internally. There is not going to be any issues with excess skin on the collar portion of the neck guard.
@thebigm trimmed his and I believe he can validate there are no issues
I trimmed mine and he was correct I had no issues. It's looser in there but there isn't tons of extra skin that would make it annoying.
- 1
-
On 3/12/2020 at 1:53 PM, Peter36 said:
Could you wear an Aegis without a dangler and feel that it's enough protection?
I don't wear a dangler that's why I look for the best neck protection out there.
-
On 3/11/2020 at 9:18 AM, Deltadre said:
@thebigm How long have you been using it and how is it holding up? I'm very interested in this product as well.
I got my in summer of last year and it's holding up perfectly fine!
On 3/11/2020 at 10:18 AM, A.YOUNGoalie13 said:Any tester think this is better than a roughneck?
So I haven't used a roughneck but I have used 2 Maltese a 2nd gen and his last gen he made.
I found personally the Aegis has much better impact absorption properties than the Maltese. I never got hurt in my Maltese collar but I could feel impacts from hard slap shots that would hit me up high. None that cause discomfort or pain just a sensation to let me know where it is. With the Aegis I barely felt as the first shot in a game I took when I first got it hit me in the collar bone!
I can't say anything about the weight between the two because my second collar didn't have the Reiter spec so it was a smaller size bib. I much prefer the Aegis shape as it offers much more coverage in the clavicle than my Maltese. Comparing visually to the Roughneck the look to be about the same size? I am unsure as I haven't gotten my hands on one.
The one thing I would probably like better on the roughneck and my personally on my Maltese is the collar portion I like the feel of the foam/gel on the neck. I also find it wraps my neck significantly better as well as i have like a 16.5"-17" neck and the Aegis was just a little too narrow. I did get a longer neck piece sent to me but still found the neck didn't wrap around my neck as much as I wanted to. I am too use to having the collar wrap all the way around my neck.
In the end I cut my old Maltese collar neck piece off and put it in the Aegis to have the best of both worlds and that's how I run it now!
- 1
-
On 3/8/2020 at 12:30 AM, TheGoalNet said:
Should be April? There’s been a couple small hang ups.
Price is $99 USD
Do you know what the price will be in CAD?
I am still using mine FYI
-
On 3/6/2020 at 5:22 PM, Griff1604 said:
Is there anything else you can share about the strapping right now?
its the vapor strapping system essentially with the option of there professor straps. I will try to post some pics later when I have some time.
- 1
-
On 2/29/2020 at 8:42 PM, Mroy31 said:
Via GGN on Instagram, another look at the one piece (maybe integrated to the core?) knee blocks
The knee block is integrated into the core for a one piece design.
I slid around in a set when we had our trade show and I liked them. The new knee block system is very nice. Also like the strapping on them way more!
- 3
-
5 hours ago, TheGoalNet said:
Thanks @thebigm - If there is an opportunity to make a longer neck insert or a larger size before the release, we will definitely do that.
Awesome I think it will make it one of if not thee best on the market! I will make sure I will have lots in stock and offer a special TGN discount
- 1
-
3 hours ago, Aquilzz said:
Damn those are hot. Love how the "one colour" pads still have texture and gradients to it. Bauer did a great job with the 2X pros in every way.
minus the fact you cant get +2
Coveted Shutting down
in Masks + Cages + Neck Guards
Posted
He did have a business partner (Investor), the business relationship ship didn't go south from what was mentioned to me he said "my business partner and I going serperate directions. He is out of the goalie mask industry." he also apologized to me that I won't be able to get a lambo ride now
the split was also amicable as well.
His former business partner is a part owner of E360 waste he has been in that industry for a while.
Side note I did get to drive a Lambo in Vegas a couple years ago and it was really fun!
Probably has a new plate on it or left it lol.