ZeroGravitas

On 7/25/2018 at 12:42 PM, TheGoalNet said:

Press release just went out... 

Lefevre is licensing the Pro Laces Armour product. This means it will be a factory direct CCM option available to all pro goalies using CCM product. 

@TheGoalNet

Any idea if this will ever come to retail or retail custom? I noticed that the CCM YouthFlex line of pads have a similar HAL/Pro Laces toe setup, instead of regular skate lace like the "regular" lines of CCM youth goalie pads. I thought it was interesting that they had that setup before this agreement came out.

11 minutes ago, coopaloop1234 said:

Just placed an order for a set myself. Been dealing with a bit of knee pain on the left leg. Hoping these will alleviate some stress. 

You wear Ritual GT leg pads, right? Were you using the Active Response Straps previously?

I too have been dealing with some pain in the knee area, though it is on my right leg. Took off the heel ARS and had some relief, but I am still using the toe strap. Even with the toe strap, I'm still getting some pain. Thinking of switching back to the HALs I had on my previous pad or just getting some Pro Laces instead.

11 minutes ago, Drew37 said:

Had my Brodeur model that was built in 2014 refurbished by Michel and it's absolutely gorgeous.  All new foam, harness, snaps and buckles.  Also had it repainted from a glossy navy blue to the matte white.  Love it!

How long did it take for Michel to refurb it? I've got my old Theodore-model mask from 2010 that has been sitting around since 2016 that is in need of some TLC...

Technically not my latest purchase - that was the Warrior stick bag - but these just arrived yesterday.

Warrior goalie stick bag.

Didn't want the sticks rubbing against the car's upholstery and leaving marks everywhere.

Bags are gear, right?

6 hours ago, Puckducker said:

What's peoples experience with custom orders from Warrior, as far as wait times? 

My order for G3 pads went in on November 5th and I'm still waiting.

@ULTIMA you had a custom order that took a while, yeah?

Did you order just custom leg pads?

I ordered custom leg pads only on 11/27/2018 or thereabouts, but the Gt, not the G3. I got them in just under 4 weeks on 12/24.

5 minutes ago, TheGoalNet said:

So, myself and Bunny had a bad issue with them? That’s 2.

Can you please chime in if you ordered something and if it was good or bad. 

I’d like to see the difference between good experiences and bad? 

Back in February of 2017, I saw they were selling some blemished HAL toe straps through a post on GGSU.

Bought them from the website using the promo code. Got a ship notification that same day.

They showed up quickly from what I remember.

I never had a problem, presumably because the item was in stock and ready to ship.

4 hours ago, 1C5 said:

@ZeroGravitas does the 961 fit as good/comfy as the Theodore? 

Haven't worn my Theodore since I got the 961 because it is need of refurbishing.

Both times (about six years apart in build date) I sent in head molds to get the most accurate fit I could.

If I recall correctly, he only has two 961-style molds, the standard one I have, and the bubble chin. So if your head is too large or too small, he would have to adjust the fit by using less or more foam than he typically would, whereas if you went with a standard shell, he could size you into the most accurate pro's mold he's got and use just enough foam.

18 hours ago, SaveByRichter35 said:

Oh ok, thanks for the clarification!

Protechsport Theodore on the left, with the triangular vents.

Protechsport 961 on the right.

Both are full Kevlar.

10 hours ago, SaveByRichter35 said:

Ok so if this is the Pro Finish, its the same as what my Pro's Choice has.  That's exactly what I wanted to compare.  Thank you so much.  Any more pictures of this shell with the triangle vents?

Hey, these are NOT the pro finish. You can tell by the little indentations that look like holes. And look at the ears, it isn't smooth and flat. The pro finish is much smoother and sexy. Just like a brand new mask is smooth on the exterior, the pro finish is the same, except it is the interior.

The Brodeur one I posted on Page 13 is the pro finish.

I'll be back with more pics. The triangle vent mask is my Theodore that really needs to be refurbed. Gotta get to the rink right now.

6 hours ago, SaveByRichter35 said:

Perfect, thanks for the pictures!

More pics for you.

16 minutes ago, SaveByRichter35 said:

And this is the pro finish?  Can you please post more pictures of the interior, specifically straight on?  And anyone else who has a non pro finish interior please take some straight on angled pictures?

These are my old images from a Brodeur-mold maskthat passed through my hands back in 2014. This had the smooth finish, which looked awesome.

Not at home, so I can't take pictures of my Theodore and 961-mold masks that do not have the pro finish.

1 hour ago, SaveByRichter35 said:

This is what he refers to as his Pro Finish, correct?  Does anyone have pictures of their Protechsport masks without the smooth interior? 

Yep, pro finish is the smooth inside.

I have two Protechsports, but the attached isn't my photo.

You can see the "roughness" on the side, there.

It isn't really rough, just kind of bumpy.