![THE GOAL[ie] NET[work]](http://content.invisioncic.com/r274873/monthly_2018_03/logo-02.png.d6f61971ea123d3bfb039f976a1ffe77.png){kind=logo}
thebigm
-
Posts
234 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Store
Gallery
Blogs
Events
Downloads
Everything posted by thebigm
-
Should do a raffle and donate money to charity! trying the step extremes tonight closest thing to two piece true skate pics for comparison and attack angles. The true holder is just a little taller than the ccm with extreme blades in it. Ccm setup has a slight better attack angle though.
-
Maybe I should do a giveaway with my last one its taped up but never used! hmmmm. I did cut it to be shorter but beggars can't be choosers!
-
My boss lost a bet to me so I didn't even have to pay for them
-
Thanks! I am not into all the filter jazz lol just the raw images haha! I just need to cut it when I get home and make it a black tape bandit! looks sick with the filter!
-
My new custom CR1s came in 26” bishop
-
I have a old two piece vh
-
We will I was using my Source book so only time will tell! It's my bible for all things pricing!
-
$649.99 will be Canadian retail. My sources are pretty accurate unless they changed the MSRP.
-
Let the list begin. Starting from June 2017 till now. Warrior GT set 3 pack custom cr1 mrazek 2017 civic sport touring hatchback CCM GFL Pro helmet and cat eye cage 3 pack custom CR1 bishop 1s pants extreme flex 2 pants Bauer 2S set monster tlg factory mad knee pads also have the warrior g4 set and chesty now as a demo till I order my own.
-
I will say that they have the least amount of break in. I have pretty sensitive feet when it comes to skates so it took a little bit of adjusting to the boot. Hands down best fit though!
-
It will have the dip like the 1S and S190 .
-
With the "two piece" you can literally use any holder. You can use a cowling or go the cowlingless route is really is the most universal. I have yet to hear of any issues with the one piece. I was talking to an ECHL equipment manager and he said a lot of guys are switching to them but he has the same fear if they damage the skate they have to replace the entire skate. He hasn't seen any that have broke though.
-
I believe the changes for the one piece were just some esthetics! I tried it on yesterday as we have a sample one and I find that I don't like the flatter setup up. I was trying to do a push with it and struggled. Tried the two piece and did not have problems with it. I do really like the look of it but the holes bother me in it. they have no flex so you will have 0 energy loss in your pushes that's forsure. I am converting my old VH skates with one60 cut holders to the new ccm holder which acts as a "cowlingless" skate but still has a toe cap and heel cap to see if I can get a better push. Will be putting step steel in it as well just the regular height ones. Will do a review on it.
-
I would agree as I would have totally done the reverse of what I ordered Primarily Black and than I would have either done white or silver. Side note none of the additional requests I asked for could be done. So I can't get a plus 2 or the others at this time
-
I was quoted potentially $500 to do a custom graphic (not that I can do one at this time). They haven't sorted the pricing out just yet. It's just the amount of time that will be spent doing the custom graphics for people.
-
I want strapping wrap/landing. as its easier to put on but I don't think i would really care either way but my preference is towards the 1x calf setup
-
They probably do. Only thing is I think they are trying to streamline the launch so it doesn't cause too many back orders like the last time. I'm sure they are gonna be able to handle the load I am just worried about the custom graphics if they are gonna be able to keep up. I hope I can get the plus 2
-
My custom 2S set I submitted! Should have them here by end of May! Plain set really Only difference from a stock pad is a soft boot break additional custom options I asked my rep to get done for me are a medium pad with large length and the 1X calf as I like how simple it is.
-
I just sewed it up! Just a pain for a $300 pant and second day stitching came out! at least the Bauer has held up for at least two skates just found the knee wasn't wide enough for my knee pads!
-
They will not fit at all. The steel is two different widths to start and the blades connect in a different fashion as well.
-
I am a dealer and I can't even get Canadian made CCM gear! Side not new ExtremeFlex II pants are nice but same problem I had in my premiers inside leg stitching coming undone after 2 uses!
-
That might be a Europe thing only than here in Canada and I am pretty sure US there is no up-charge for a custom set!
-
There should be no price difference for a custom CCM set
-
My one strap the ring separated I was taking it as a fluke as all the others are fine!
-
I've been using the madusa harness shortly after they launched it with only one problem the silver ring came undone which i don't care i just took it off and continue to use the harness! Jeff offered a replacement one for me I declined as I don't really care!
