indykrap

Hey all, So, I did a dumb. I was changing the cage on my mask (Sportsmask X8) when one of the screws was stuck - I think the contact cement from the foam got caught in it and bonded the screw to the post, so it wasn't moving. Out of frustration, I decided to cut the screw head off and replace it. However, in the process, I scraped at the top coat of paint on my mask, exposing the next layer (light beige fibreglass, I believe). I took out some acrylic paints and clear coat to cover this up, and yes - it's real ugly, so I am thinking of accelerating my plan to sand down the top layer and do a proper paint and clear coat of it. My question is - have I harmed the integrity of the mask in any way doing this? I have checked on the other side and there is no damage, and it feels structurally sound. Also, tried the coin tapping trick someone mentioned here by seeing if it sounds different on the exposed area and it does not. Any other advice on how to check would be great. If it's in need of a replacement, I also accept that as it's about 8 years old at this point and despite cage and foam replacements is coming due. Note: I haven't used and don't plan on using it unless I'm confident in it.

Yeah - more responsive sounds about right. I did try this in one game and I liked the responsiveness, but it did feel somewhat awkward because I'm so used to looser pads (so that's on me). Noting that down! Thanks @coopaloop1234 for the great advice (as per usual).

Hey all, I've been a Warrior user for about four years now (G3 and now G5) and following random bits of advice online, but really realizing I don't have a good fulsome grasp of how I like my pads strapped in. I get good performance most days, but feel like I'm missing "something". So I'm asking all of you! Here's my setup (bottom up): - Boot/toe strap removed. Added Prolace armor with about two knots - Calf wrap about halfway - Knee strapped to calf, but kept loose and only up to the end of the velcro - Buckles/nylon straps removed Picture attached, but ignore the knee wing as I have it on there for experimenting. Also, for reference, I do have pretty big legs, so I keep mine fairly loose as a result. Some questions I have: 1- How do you strap your pads? 2- Is this too loose? Should I consider going tighter in some way? 3- Does going to the knee aid in five hole closure at all? I feel my technique is decent, but my closure is meh, even with decent curve. 4- Should I use the nylon straps? I recall a lot of people taking them off their G3s, so I did then and took it off when I got these. I generally have no issue with staying on the block. I usually spend my summer skates getting more "dialed in" and working on gear stuff, so any advice or suggestions are welcome. Thanks all!

On a scale of Becel to Land O'Lakes, how butter is that 6.1 glove?

New THS review just dropped

I'm curious about this too. The CSA standard is publicly available (for a fee, natch), so I wonder if it does make the distinction or there is much testing difference between goalie and player helmets. https://www.csagroup.org/store/product/Z262.1-15/ I did a work term there a decade ago and I know all the testing is in Rexdale (North Toronto) - wonder if they'd ever do a tour!

Interesting. Was going back and forth between a Sportsmask x8 and Coveted A5 for my next mask - I've had an x8 since 2014, and it's due for a replacement (even after foam/cage/hardware replacements). Leaning Coveted and I think I may be sold.

Yeah I can't compete with that. Are you going to have rebounds at all, or are they just going to get absorbed in you?

It's got some flump for sure, but could always do with some more. What did you end up cooking up in the lab?

I got a McKenney in the basement you can have for cheap and flump up to your heart's content

This is really interesting to me - coming from a G4 but interested in looking at the G6 glove. Which is which for the break? i.e. is sewn in the 580ish?

Snapped the cap off a tooth once... opening my water bottle with my teeth. Skated over to the bench and handed it to one of my players to weird him out. Obviously I play up the story a lot more when I tell other people. Other than that, just the usual twangs and pains - usually in the hip area and feeling it in the knee. Did really pull my groin when I was starting out by jumping out and taking shots before properly stretching, which was pretty brutal. Thank fully no problems with hits to the head - got one right between the eyes that dented my cage and had a player kick my cage once while falling down, but no incident from either other than having to replace an annoyingly expensive piece of gear.

I've got pretty big legs and generally have good luck with Warrior. I use the ones that came with my G5s but have used the Pro+ in the past with no fit issues.

Weird - should be fixed now I hope.

Couple of pics from this week's experimentation. Used a 25mm (1") hole saw to cut the initial holes and a dovetail saw (it's what I had around) to trim the paddle. Sanded down with 220 grit and used two-part epoxy to seal everything: Old Warrior STR foam core to test the process/feel of it: - cut the initial hole and then trimmed a bit off the paddle. It felt good, but not as sturdy to hold with the paddle part removed, so I changed it up for the next one: CCM Premier 2.9 Composite - drilled the initial hole for height/placement. I think i got this one a bit deeper than I hoped, but it does feel comfortable. After playing around a bit with it at home, I decided to trim below the hole to fit a bit better. Felt my blocker was snagging on it. Could have really used a dremel or sawzall here! haha I used it sunday at a pickup and it felt really good to play with. There was a slight awkward feeling of the top area kind of poking my finger when i would hold it awkwardly (i.e during a scramble or if I recovered poorly from a poke), so I think i'm going to either grind it down a bit to soften it or just add a few layers of tape to soften it. I see most people use grip tape, so that might be a better play to add some layers and make it more comfortable. I'm very open to advice on this. All in all, a really fun experiment. I'll need some time to iron it out and get the issues sorted before I do it to the main stick though. When I do I'll be using a sawzall or dremel to do it nice and clean, though.

Going to try it out this weekend - using a hole saw to cut a notch in the paddle (using only half of the saw to cut a semi-circle into the paddle), sand it to smooth, and then epoxy it to seal. I'll come back with pictures! Any tips/thoughts about this method? Will use an old foam core as a test run to get the template right, then do it to one of my CCM composites (the older, beat-up, only-good-for-practice one). If I like it well enough I'll do it to my main stick.

Been using Febreze Antibacterial for years. Smells good, easy to find/relatively inexpensive, doesn't dry stuff out, and smells good while drying so it doesn't stink up the house airing out!

Interesting - what do you mean by that?

6'0 and using 26" CCMs Premier 2.9s. Height feels good, but I'm always looking to experiment with shorter. Is there any economical way to do this? For some reason all my goalie buddies use 27", even though I'm taller than them haha.

I love the blocker - got a G5 Sr+. solid rebounds, comfortable, and the adjustability is great. I have the G4 glove so I can't speak to G5s, but it's a total vacuum and also really comfy and easy to adjust to your hand. Some guys on here really prefer the sewn-in glove instead of the replaceable palm because it feels sturdier and more consistent though, and that's not offered with the G series at stock (GT though?)

I too, am ready to be hurt again.

Update: finally got in a game on it, and it is more than protective enough for the level I'm at. I love the seal and protection on the arms too - definitely had a few that would have either snuck through or stung like hell in my old unit. Thanks @coopaloop1234 for the advice!

Heard back. Warrior is completely sold out with no recovery date in their system. Their guess would be summer before they see any more. So if anyone has a lead on one I'm all ears...

Right - I remember when the G3 seemed like the most popular thing in the goalie world. Now that it's settled in as "just another line" that makes sense.

Thanks! Didn't realize it was a special order.