Jump to content

#ModMonday Contest by Factory Mad


TheGoalNet

Recommended Posts

8C69294E-FF6C-42F2-8223-05D39EC1AF99.jpg

A91116CA-BD40-4E8E-AC3C-C17156A3CD65.jpg

IMG_1625.JPG

- So I started with my old circa '98 Sherwood Van Velden bucket.  

- Stripped her down, did some sanding, filling, and priming.  

- Had it hydro dipped with the carbon fibre pattern.  

- Replaced the cage with a new cat eye from goalieparts.  Still had to drill some new holes for the cage to fit correctly.  

- Replaced all of the hardware, strapping, and chin cup.

- Replaced all of the foam with Maltese GPS gel.  

- Profit $$$

Link to comment
Share on other sites

1 hour ago, SaveByRichter35 said:

Does it have to be a mod done yourself or can it be a mod that was asked to be done for you?

ABSOLUTELY it can be something you had paid to be done. Factory Mad provided the give away stuff, need to support our sponsors!!! 

Link to comment
Share on other sites

On 2017-08-29 at 8:44 PM, TheGoalNet said:

ABSOLUTELY it can be something you had paid to be done. Factory Mad provided the give away stuff, need to support our sponsors!!! 

TGN the person who submits their mod should also explain what was done!

Doobie - while its obvious your masque was refurbished ( nicely by the way ) I think it would help if you explained the whole enchalada?

Link to comment
Share on other sites

2 hours ago, motowngoalie said:

I was able to finish wrapping my mask tonight, so here's my submission.

Motown - these are stickers/labels?

Are you able to get this clear coated after?

If these are labels can you let us know what was the cost?

Link to comment
Share on other sites

9 hours ago, Big2 said:

Motown - these are stickers/labels?

Are you able to get this clear coated after?

If these are labels can you let us know what was the cost?

@Big2 Yes sir, from Custom Cages: https://www.custom-cages.com/ 

Cost me about $30 USD for the kit, including shipping. Plus, Dan from CC let me swap out the numbers area on the chin for an Olde English D at no additional cost :) Highly recommended I'd say! If you want to add anything to their stock kits or create something custom, they'll do it. You probably could clear coat it, but I don't think it'd be worth it. 

Link to comment
Share on other sites

1 hour ago, motowngoalie said:

@Big2 Yes sir, from Custom Cages: https://www.custom-cages.com/ 

Cost me about $30 USD for the kit, including shipping. Plus, Dan from CC let me swap out the numbers area on the chin for an Olde English D at no additional cost :) Highly recommended I'd say! If you want to add anything to their stock kits or create something custom, they'll do it. You probably could clear coat it, but I don't think it'd be worth it. 

Looks great man!

Link to comment
Share on other sites

Got tired of the fraying binding on my 1S pads leg channel wing. I won't say it was super easy, but it was something I wanted to try. 

Got some Jenpro from Fix My Gear, sewing needles from Michael's, nylon thread from Len's Mills, and a pair of pliers so I didn't kill my fingers. 

In the end I think my comfort with not having a fraying binding will win out over any OCD about those stitches :P

(blues are only different because of flash) 

20170831_214135.jpg

20170831_221924.jpg

20170831_223601.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Who's Online   0 Members, 0 Anonymous, 38 Guests (See full list)

    • There are no registered users currently online
  • Member Statistics

    2,008
    Total Members
    2,646
    Most Online
    b709
    Newest Member
    b709
    Joined
×
×
  • Create New...