Jump to content

bunnyman666

Members
 View Profile  See their activity

  • Posts

    5,786

  • Joined

  • Last visited

  • Days Won

    160

 Content Type 

Everything posted by bunnyman666

  1. bunnyman666
    The method that I used to reskin the blocker didn’t eliminate ANY of the pop for the hard rebounds. This block pops shots just as hard, if not harder than before. The foam backing was removed from the Jenpro.
  2. bunnyman666
    But I saved the goal
  3. bunnyman666
    This could’ve been terrible. Invest in a good mask.
  4. bunnyman666
    I had a whooped GM3000, so I did a thing:
  5. bunnyman666
    I don’t know what was going on with the mechanical Avid I had installed. I didn’t want to tear it down and rebuild it. I will have to, eventually LOL I bought Shimano, which used regular mineral oil.
  6. bunnyman666
    Lizard Skinz now owns that brand, but they have retained the same quality.
  7. bunnyman666
    If it’s printed and cut design, then definitely; if it is an entire design on a few sheets of vinyl meant to cover the entire mask, then it depends on the installation.
  8. bunnyman666
    Added Shimano hydraulic rear brake to my Dirt Jumper build. I was becoming quite irritated with how I couldn’t stop on the bloody thing. I have a Hope rear disc (203mm), so stopping shouldn’t be an issue, but it took WAAAAAYYYY too long to stop. Normally Avid calipers do the job, but something was off. Also replaced the grips with Lime Green Oury, which are super nice grips. Pix to come…
  9. bunnyman666
    Great stuff. He’s one of the good ones!
  10. bunnyman666
    The lower end XSG holder uses plastic hardware, which CAN be replaced with metal FYI
  11. bunnyman666
    I have seen it once in person (a pop out), but it is likely a rare occurrence. If Bauer’s soft steel has been rectified, then I would be happier to try the new Skate bone stock, no changes.
  12. bunnyman666
    Correct!
  13. bunnyman666
    Where did that jersey come from?
  14. bunnyman666
    Exactly. I am fine with the flat stance, I suppose.
  15. bunnyman666
    Okay- based on retention system alone.
  16. bunnyman666
    Witnessed Beer Leaguer Joe pop a shot that popped a Bauer blade from the holder, and both the shooter and shootee were equally shocked. Just say no to the Bauer holder.
  17. bunnyman666
    Jeff Salvi? Good builder.
  18. bunnyman666
    If I could order these with no holder, I would. The CCM retention system on the holder is the best out there.
  19. bunnyman666
    I can air mine out and whilst not smelling like a rose, it doesn’t kick you in the face, either. I don’t spray, but I also don’t let my stuff sit in a closed bag.
  20. bunnyman666
    I thought it was PAW.
  21. bunnyman666
    I suppose a screech is better than monotone; though both go right through me!
  22. bunnyman666
  23. bunnyman666
    With a bit of a twist! I had new wheels powder coated for my whip and liked the colour so much that I decided that the cage needed to be done, so here we are: repro Jofa in Triple Bronze:
  24. bunnyman666
    Queue the Living Colour song “Open Letter to a Landlord”…
  25. bunnyman666
    LOL Snow, sand, or in my case: a tougher bike workout! The inertia of these wheels and the ponderous steering make it tough to ride.
×
×
  • Create New...