Teezle Posted Thursday at 02:22 PM Share Posted Thursday at 02:22 PM (edited) 9 hours ago, ZeroGravitas said: Hyperlite 2 customizer is live. https://www.bauer.com/pages/mybauer-goalie-gear?family=ProCustomGoalierGear2023 I spy a 90 degree glove break as a custom option. Our prayers have been answered! Edited Thursday at 02:23 PM by Teezle Quote Link to comment Share on other sites More sharing options...
ZeroGravitas Posted Thursday at 03:59 PM Author Share Posted Thursday at 03:59 PM 1 hour ago, Teezle said: I spy a 90 degree glove break as a custom option. Our prayers have been answered! I saw that oh my goddddddd and @ThatCarGuyfound the customizer booklet too - https://bauer.a.bigcontent.io/v1/static/MyBauerCustomGoalGear-2023-ENG-updated03132023 2 Quote Link to comment Share on other sites More sharing options...
coopaloop1234 Posted Thursday at 04:02 PM Share Posted Thursday at 04:02 PM On 3/14/2023 at 3:31 PM, ZeroGravitas said: "BATTLEFLY" On 3/14/2023 at 6:38 PM, keeperton said: But I need my binary paradigms to define different kinds of goalie gear by! On 3/14/2023 at 8:06 PM, Chenner29 said: Did you just assume the position my pads land in I deserved this. 1 Quote Link to comment Share on other sites More sharing options...
Hockey34 Posted Thursday at 08:01 PM Share Posted Thursday at 08:01 PM Is the 580 going to be custom only or will it be retail also? Quote Link to comment Share on other sites More sharing options...
ZeroGravitas Posted Thursday at 10:04 PM Author Share Posted Thursday at 10:04 PM 2 hours ago, Hockey34 said: Is the 580 going to be custom only or will it be retail also? Seems like it's a Pro Custom option only. Not available under normal Custom. Much like the Vapor 2-Piece blocker option. Maybe some stores will be able to order the Vapor 90 as a SMU? Quote Link to comment Share on other sites More sharing options...
RedX Posted Friday at 01:30 AM Share Posted Friday at 01:30 AM 3 hours ago, ZeroGravitas said: Seems like it's a Pro Custom option only. Not available under normal Custom. Much like the Vapor 2-Piece blocker option. Maybe some stores will be able to order the Vapor 90 as a SMU? Having used a Bauer 580 for the past couple of months. I will say that it’s …ok. I can catch with it for sure, it breaks in decent and it mostly seals well on the ice. I do find the thumb angle too flat. The the fold-over Tee is more CCM then it is Lefevre. There can be a gap in the seal. I wish they merged the 580 with the Mach internal glove material which I find very comfortable Having used a number of 580s over the years including some from other brands I think a Lefebvre made one is still superior. Quote Link to comment Share on other sites More sharing options...
A.YOUNGoalie13 Posted Friday at 02:23 AM Share Posted Friday at 02:23 AM 11 hours ago, Teezle said: I spy a 90 degree glove break as a custom option. Our prayers have been answered! Beat me to it! But is it the Reimer??? Quote Link to comment Share on other sites More sharing options...
A.YOUNGoalie13 Posted Friday at 02:58 AM Share Posted Friday at 02:58 AM Had my fun. Need something that will work anywhere I land. Which of these looks like a winner? If you can't tell I'm not a huge fan of the upper zone. Having such a large area of negative space makes it look out of place to me but it does look decent on the blocker creating a stripe effect. Quote Link to comment Share on other sites More sharing options...
Hockey34 Posted Friday at 03:23 AM Share Posted Friday at 03:23 AM 23 minutes ago, A.YOUNGoalie13 said: Had my fun. Need something that will work anywhere I land. Which of these looks like a winner? If you can't tell I'm not a huge fan of the upper zone. Having such a large area of negative space makes it look out of place to me but it does look decent on the blocker creating a stripe effect. I like the last one the best. 1 Quote Link to comment Share on other sites More sharing options...
ThatCarGuy Posted Friday at 04:06 AM Share Posted Friday at 04:06 AM 1 hour ago, A.YOUNGoalie13 said: Had my fun. Need something that will work anywhere I land. Which of these looks like a winner? If you can't tell I'm not a huge fan of the upper zone. Having such a large area of negative space makes it look out of place to me but it does look decent on the blocker creating a stripe effect. Keep in mind there’s very little difference between Vegas grey and black 1 Quote Link to comment Share on other sites More sharing options...
Hockey34 Posted Friday at 04:21 AM Share Posted Friday at 04:21 AM (edited) 1 hour ago, A.YOUNGoalie13 said: Had my fun. Need something that will work anywhere I land. Which of these looks like a winner? If you can't tell I'm not a huge fan of the upper zone. Having such a large area of negative space makes it look out of place to me but it does look decent on the blocker creating a stripe effect. I would probably do something like this. Edited Friday at 04:21 AM by Hockey34 1 Quote Link to comment Share on other sites More sharing options...
A.YOUNGoalie13 Posted Friday at 05:37 AM Share Posted Friday at 05:37 AM 1 hour ago, ThatCarGuy said: Keep in mind there’s very little difference between Vegas grey and black Good to know. I'm surprised the difference is so small. Brossoit has had both on his pads and the difference is noticeable. Maybe with other colors around the difference is greater? Or maybe when grey is in the majority the darker black seems more different. Quote Link to comment Share on other sites More sharing options...
TheGoalNet Posted Friday at 06:39 PM Share Posted Friday at 06:39 PM 17 hours ago, RedX said: Having used a Bauer 580 for the past couple of months. I will say that it’s …ok. I can catch with it for sure, it breaks in decent and it mostly seals well on the ice. I do find the thumb angle too flat. The the fold-over Tee is more CCM then it is Lefevre. There can be a gap in the seal. I wish they merged the 580 with the Mach internal glove material which I find very comfortable Having used a number of 580s over the years including some from other brands I think a Lefebvre made one is still superior. Believe with pro custom you can order a 90 deg with Mach internals. I plan to do that. 1 Quote Link to comment Share on other sites More sharing options...
RedX Posted Saturday at 02:52 PM Share Posted Saturday at 02:52 PM (edited) I received a couple questions on my Bauer 90 degree break. This glove has the Hyperlit internals and backhand/cuff. Other Pro versions of the 90 degree break I’ve seen and held have had the old Supreme cuff which I actually prefer. IE Reimer’s, Enroth’s etc. My prediction for this glove is…… that there will be plenty partially used gloves for sale next year around this time. I’m by no means saying this is a bad glove, as I stated above it’s solid glove that I can catch with. However, I don’t know if it will be for everyone. There was enough interest that they brought it to retail. But seeing comments primarily from social media, it seems people believe this is the final boss of 90 degree breaks based on its rarity. Having used Canadian made Lefevre’s for years. I have to give it up to them when it comes to a 90 degree break. It feels like going home when you wear those gloves, where this does feel like a clone. Edited Saturday at 07:26 PM by RedX Quote Link to comment Share on other sites More sharing options...
A.YOUNGoalie13 Posted Saturday at 04:35 PM Share Posted Saturday at 04:35 PM 1 hour ago, RedX said: I received a couple questions on my Bauer 90 degree break. This glove has the Hyperlite and you can internals and backhand/cuff. Other Pro versions of the 90 degree break I’ve seen and held have had the old Supreme cuff which I actually prefer. IE Reimer’s, Enroth’s etc. My prediction for this glove is…… that there will be plenty partially used gloves for sale next year around this time. I’m by no means saying this is a bad glove, as I stated above it’s solid glove that I can catch with. However, I don’t know if it will be for everyone. There was enough interest that they brought it to retail. But seeing comments primarily from social media, it seems people believe this is the final boss of 90 degree breaks based on its rarity. Having used Canadian made Lefevre’s for years. I have to give it up to them when it comes to a 90 degree break. It feels like going home when you wear those gloves, where this does feel like a clone. What if someone has never used a lefevre 90? Think it would do the job if they don’t know any better? Quote Link to comment Share on other sites More sharing options...
ThatCarGuy Posted Saturday at 04:56 PM Share Posted Saturday at 04:56 PM 20 minutes ago, A.YOUNGoalie13 said: What if someone has never used a lefevre 90? Think it would do the job if they don’t know any better? Yup. I had a bauer 580 before a ccm/Lefevre one and I actually like the Bauer more mainly because of the rectangle shape instead of the L shape a traditional 580 has Quote Link to comment Share on other sites More sharing options...
RedX Posted Saturday at 07:28 PM Share Posted Saturday at 07:28 PM 2 hours ago, ThatCarGuy said: Yup. I had a bauer 580 before a ccm/Lefevre one and I actually like the Bauer more mainly because of the rectangle shape instead of the L shape a traditional 580 has Was the CCM Canadian made? I do think there is quite a bit of difference between the domestic and offshore 580. Quote Link to comment Share on other sites More sharing options...
RedX Posted Saturday at 07:29 PM Share Posted Saturday at 07:29 PM 2 hours ago, A.YOUNGoalie13 said: What if someone has never used a lefevre 90? Think it would do the job if they don’t know any better? It will do the job, the glove can catch. Quote Link to comment Share on other sites More sharing options...
ThatCarGuy Posted Saturday at 07:48 PM Share Posted Saturday at 07:48 PM 19 minutes ago, RedX said: Was the CCM Canadian made? I do think there is quite a bit of difference between the domestic and offshore 580. I’ve since tried both offshore and Canadian made and honestly didn’t notice enough of a difference in 580s to call it out. 600s is where the difference really shines Quote Link to comment Share on other sites More sharing options...
Hockey34 Posted Saturday at 08:34 PM Share Posted Saturday at 08:34 PM Some color options I came up with just messing around with the customizer 1 Quote Link to comment Share on other sites More sharing options...
keeperton Posted Saturday at 09:31 PM Share Posted Saturday at 09:31 PM I feel like Bauer keeps stepping up their game little by little on various small things, it's a good look. I'm still really glad about the 2-piece blocker being available, and now the seeming mid-range Konekt (with sizes outside of senior) and the 90deg break; the only other companies doing gloves that feel as nice, or nicer, off the shelf are Brian's and Warrior (Vaughn closures don't agree with my hands). They're going to keep winning over customers. Quote Link to comment Share on other sites More sharing options...
coopaloop1234 Posted Saturday at 09:31 PM Share Posted Saturday at 09:31 PM 3 Quote Link to comment Share on other sites More sharing options...
A.YOUNGoalie13 Posted yesterday at 05:53 PM Share Posted yesterday at 05:53 PM So a guy from Bauer just told me over the phone that digs-print is only a $100 add-on?? I hope that's true because tbh, when I'm already dropping 3k on a custom set what's $100 more. I also asked about the 90 degree glove. I asked if it was the clone Reimer has been wearing and the guy freaked out as if he couldn't believe people knew the thing existed. He said he couldn't comment on any clone of a competitor's product or any details of what pros wear. I did get him to admit that this new glove is NOT the same as Reimer's and that this glove is intended as a direct rival to the CCM/True 580. Anyway, given this development of rather in-expensive custom designing, I would like some professional opinions on what I should use. I'm using black, white, grey, silver, etc to keep it neutral since I don't know where I'm playing yet this season. I was thinking of maybe re-using one of the following designs just in those colors. You would think as a graphic designer I would make my own but why would I do all that labor when somebody was already paid to make these!!! elvis-merzlikins.webp elvis-merzlikins.webp Quote Link to comment Share on other sites More sharing options...
coopaloop1234 Posted yesterday at 06:54 PM Share Posted yesterday at 06:54 PM (edited) 1 hour ago, A.YOUNGoalie13 said: So a guy from Bauer just told me over the phone that digs-print is only a $100 add-on?? I hope that's true because tbh, when I'm already dropping 3k on a custom set what's $100 more. I also asked about the 90 degree glove. I asked if it was the clone Reimer has been wearing and the guy freaked out as if he couldn't believe people knew the thing existed. He said he couldn't comment on any clone of a competitor's product or any details of what pros wear. I did get him to admit that this new glove is NOT the same as Reimer's and that this glove is intended as a direct rival to the CCM/True 580. Anyway, given this development of rather in-expensive custom designing, I would like some professional opinions on what I should use. I'm using black, white, grey, silver, etc to keep it neutral since I don't know where I'm playing yet this season. I was thinking of maybe re-using one of the following designs just in those colors. You would think as a graphic designer I would make my own but why would I do all that labor when somebody was already paid to make these!!! elvis-merzlikins.webp 85.01 kB · 0 downloads elvis-merzlikins.webp 85.01 kB · 0 downloads I was quoted an increase of $500 CAD off of the base price for the Digiprint/pro custom option. I'd double check with your retailer and get a quote to make sure. Edited yesterday at 06:55 PM by coopaloop1234 Quote Link to comment Share on other sites More sharing options...
A.YOUNGoalie13 Posted yesterday at 08:03 PM Share Posted yesterday at 08:03 PM 1 hour ago, coopaloop1234 said: I was quoted an increase of $500 CAD off of the base price for the Digiprint/pro custom option. I'd double check with your retailer and get a quote to make sure. I will 100%. I actually talked to 2 different guys and my phone cut out so I had to call again. Guy 1 said it depends on the design. Guy 2 said $100. I'm wondering if $100 is a base price and maybe $500 is a max? If it does vary I assume a design they have already done would be cheaper since they already have the file. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.