ZeroGravitas

Looks like Vaughn Velocity 10.

First custom Hyperlite2s are rolling out. Vapor 90 closure video was posted on GGSU: 345336808_3340050886260011_9081976716512738922_n.mp4

Actor guy who was in the Suicide Squad movies and some other stuff, who kinda looks like the goalie youtuber "The Thin Red Line.". IIRC the youtuber bought some Bobrovsky pro returns that were PXs skinner as 12.2

What is going on with the guy in the white jersey? Is he wearing a Zorro mask underneath the helmet or what?

Teezle is Joel Kinnaman!?!?

Wow, someone cares what I think As you say, it is really close. I think your knee is just a teeny bit low on the knee cradle, but you do wear a pretty bulky knee pad. And if you went smaller, you might get a little more control in the knee, but you'd give up that little of that thigh rise for your Jiggy-fly. Tough call, but I'd go with the Large.

Hello all, Selling my Total Custom Pro CCM Axis 2 set. These are built to NHL rules with the lace to separate the landing gear from the pad. Just didn't like it as much as my Bauer stuff. Gear is used less than 20 times. Some minor wear on the thigh rises, pics are attached. No odor - gear was spritzed with Captodor after every use and aired out after every use. Blocker palm is in great shape. Glove probably isn't even 100% broken in, but still closes pretty great despite that. The original boot straps from CCM were leather but with a red sticker stamped on top of them. That sticker wore and ripped off early on. Leather straps were replaced with brand new leather straps sourced from Protective Athletic Wear. The pads have not been used since the straps were replaced. All zones are White Weave or Red Weave where possible. Sliding edge is red weave. Certain zones are Speedskin only. My nickname "ODIE" is embroidered on every piece. Shipped from California. Looking for $1,600 USD shipped CONUS - sorry, but shipping is expensive these days. Canada shipping, I'll have to do some calculations. These will be exclusive to this website for a week or so before I post to SLS at a higher price. Pad specs as follows: 33+1.5 Recessed foam with removable knee wrap (included, not in pics) HD toe bridge with bungee lace 3D grip knee landing Pre-curved / single break core / no break outer roll No leather strap at knee - 2" elastic only Tight fit leg channel with QMSS Shallow soft boot Under heel boot strap (Removed CCM's crappy leather boot strap and replaced with PAW boot strap) No thigh protector lace tabs Glove specs as follows: Pro stiffness Regular SR palm size 580 break Double tee AX Suede SureGrip Grey With pinky loop Regular hand (Catcher on left hand) Nylon pocket lace Blocker specs as follows: Regular SR palm size Regular hand (Blocker on right hand) AX Suede Beige with Black Palm Straight finger protection Regular fit

Just going off your FTK and looking at the pad fit pic - L looks right. Catalog size chart below. At 20.5 FTK, you're topping out a Medium, but you're right in the middle of the size range of a Large. Below is the breakdown of Bauer sizes. Pros are able to mix and match to get a longer thigh and/or shorter boot, whereas we retail customers are locked into boot/shin/thigh sizes. It doesn't read well horizontally, so I put this together for retail sizes. Based on this "secret" size chart, the Medium should be the same boot length, but slightly shorter in the shin and the thigh. Judging by the pad fit pic, I don't think you'd want to lose the half inch in the knee. EDIT: I assume you're wearing skates in the fit pics, too?

9X3s started to roll into my store last week. Glove is a 60 degree break and felt noticeably crappier in terms of stiffness/closure than 20.2. Note that like the Canadian-made stock models, white-based leg pads will have FastGlide on the sliding edge while black pads will have regular jenpro.

V10 legs, gloves, blockers and chesties have rolled into my store. Talk to your LHS and see if they've got them too!

Hi all, happy to serve as a janitor. I exist only to delete spam. Please report spam/spammers immediately and I'll do my best to clean it up. You may all continue to use this website as a front to traffic guns/human organs/etc.

Spoke to Bauer about this previously and it will have a more traditional construction on the backside - so there will be a wrist strap, unlike Mach.

Sounds like Medium is the right size for you. Are you in the US? You can take advantage of Pure Hockey's return policy and return used gear: https://goalie.purehockey.com/support/Returns_and_Warranties/pg_id/11

Got it - assumed the blue was one of the 58G/60G he was selling.

Are your measurements for the Adidas 3-stripe for the 58G or 60G?

Sidewall shape is different, too. Board composition is different. Mach is HD foam + Curv, Hyperlite 2 is Rebound Boost + Curv. IIRC from using HL1 and Mach, Rebound Boost is a little softer and spongier-feeling. I think rebounds are slightly harder off Supreme, but it's close. Hyperlite 1 had a thumb pillow, Supreme family doesn't. I think HL2 has the thumb pillow too. You can add/delete the thumb pillow if you go Pro Custom. Yes, Bauer moved the palm on HL2 one centimeter lower.

I believe it's made overseas, either in China or Vietnam. Don't quote me on that though.

https://invisioncommunity.com/4guides/staff-and-moderation/moderating-content-r74/ Scroll down to "Automatic Moderation" and "Community Moderation". There's some neat stuff there that might work for this board.

I wanna see a distribution chart re: post counts. I'm sure you're on the spectrum.

In light of all the spam today: is there some sort of permission that can be granted or a better reporting feature we can set up to hide spam posts? From what I understand, reporting a post doesn't do anything besides sending it to a Mod to review - but that post is still on the forum in the meantime and clogging up the "Latest" section. IE: If trusted/active/high post-count members of the forum report a post, it automatically and immediately gets hidden from public view and sent to the mods for review, where they can delete or approve/re-instate the post?

@xmikex32 Bauer goalie Vapor and GSX line-ups on sale at Pure and Monkey. Sizing and colors are pretty limited. Pure seems to have more availability. No coupon codes needed. Good hunting.

X5 Pro custom legs, catcher and blocker available for order at Pure: https://goalie.purehockey.com/c/custom-goalie-equipment?mfg_web_name=Bauer&sort=first_purch_dt_desc&pg=1

Looks like Catalyst 9X3 is coming soon - https://www.facebook.com/truetempergoalie/posts/pfbid028b9aRgXe5LZcmQEa31Gy2L7WQhdPZvCYyPRxxUQwL1waVJMSRaCzCTR7WWjjJDpVl

Wow, that looks really great - that textured look came out amazing. Did you come up with the design yourself?

Hyperlite 2 and X5 Pro legs rolled into my shop the other day. I know X5 Pro catchers and blockers are in, but I didn't see any HL2 catchers or blockers. I don't know if they are on the shelves yet, but soon. HL2 and X5 sticks are already on our shelves.