ZeroGravitas Posted March 3, 2021 Share Posted March 3, 2021 Visit https://ccmhockey.com/en/product/goalie/customizers/extremeflex-4 Change the last digit to 5 or just click: https://ccmhockey.com/en/product/goalie/customizers/extremeflex-5 Customizer PDF is up too: http://microsites.ccmhockey.com/microsites/eflex-5/core/imgs/2021CCM_GoalieCustomizer_RETAIL.pdf Have fun! Link to comment Share on other sites More sharing options...
Chenner29 Posted March 3, 2021 Share Posted March 3, 2021 Looks like they're going full steam ahead with Speedskin. Very few offerings in weave and jenpro Link to comment Share on other sites More sharing options...
Puckstopper Posted March 3, 2021 Share Posted March 3, 2021 That's actually better than it was with Axis last year. Camel is new for sure and I don't think you could do silver weave either last year. But yeah, they really have been doubling down on Speedskin which, as long as I can get weave on the sliding surface, is fine. Link to comment Share on other sites More sharing options...
motowngoalie Posted March 3, 2021 Share Posted March 3, 2021 .....and the glove graphic still doesn't match. Link to comment Share on other sites More sharing options...
Quaider - 30 Posted March 3, 2021 Share Posted March 3, 2021 Does anyone know when it will be available? I know the release date is today, but at what time? Link to comment Share on other sites More sharing options...
Michael_56 Posted March 3, 2021 Share Posted March 3, 2021 Glove customizer is at an all time low. Loved the ef4 and axis design but this just doesn't look right. doesn't match the pads or anything. Leg pad customizer looks good though. Link to comment Share on other sites More sharing options...
motowngoalie Posted March 3, 2021 Share Posted March 3, 2021 2 hours ago, Quaider - 30 said: Does anyone know when it will be available? I know the release date is today, but at what time? You can access it now, see links posted above. Link to comment Share on other sites More sharing options...
Aquilzz Posted March 3, 2021 Share Posted March 3, 2021 Shame that there’s no lower calf strap elastic option anymore. No idea why...it’s still offered on Axis. Link to comment Share on other sites More sharing options...
ULTIMA Posted March 3, 2021 Share Posted March 3, 2021 That middle molded knee role graphic seems out of place Link to comment Share on other sites More sharing options...
A.YOUNGoalie13 Posted March 4, 2021 Share Posted March 4, 2021 These were the cleanest designs I came up with. It is way to easy to accidentally make these pads look crazy busy unless you stay within the thin lines in the middle and at the top. And yes, for the last one, I was thinking of you @TheGoalNet Link to comment Share on other sites More sharing options...
Hockey37 Posted March 4, 2021 Share Posted March 4, 2021 Anyone have any info on the EF5 stick customizer/options/etc? Link to comment Share on other sites More sharing options...
ULTIMA Posted March 5, 2021 Share Posted March 5, 2021 Although the middle knee role really effs up the entire thing, you can definitely find something you like. And perhaps it is just me, the more I play around with this graphic, the more something keeps coming up as familiar to me. Link to comment Share on other sites More sharing options...
johncho Posted March 5, 2021 Share Posted March 5, 2021 As you say the rolls really messes things up, but from afar or in action, they don't look half bad if you stay a bit conservative with it. Link to comment Share on other sites More sharing options...
ThatCarGuy Posted March 5, 2021 Share Posted March 5, 2021 For those wondering about printing it likely won’t be available till 2022 but ccm is happy to do all of your reebok and koho requests so long as you provide the graphic since they don’t have the designs on hand Link to comment Share on other sites More sharing options...
Puckstopper Posted March 5, 2021 Share Posted March 5, 2021 Source? Link to comment Share on other sites More sharing options...
ThatCarGuy Posted March 6, 2021 Share Posted March 6, 2021 6 hours ago, Puckstopper said: Source? How’s this? Link to comment Share on other sites More sharing options...
Chenner29 Posted March 6, 2021 Share Posted March 6, 2021 4 minutes ago, ThatCarGuy said: How’s this? I wonder if Lefevre would have the files for these since they were doing all the pro gear... Koho 560-588 Reebok P1 - P4 CCM P1 - P2 CCM EF1 through EF4 Link to comment Share on other sites More sharing options...
ThatCarGuy Posted March 6, 2021 Share Posted March 6, 2021 9 minutes ago, Chenner29 said: I wonder if Lefevre would have the files for these since they were doing all the pro gear... Koho 560-588 Reebok P1 - P4 CCM P1 - P2 CCM EF1 through EF4 Even if they didn’t have them on file it would be nice if they kept peoples homemade replicas on file so that others can use it as a template. For example I’m making a P3 graphic and if someone else wanted a P3 graphic they could just use mine with different colors Link to comment Share on other sites More sharing options...
ULTIMA Posted March 6, 2021 Share Posted March 6, 2021 Just when I thought the Potvin replica sets would stop... Link to comment Share on other sites More sharing options...
ThatCarGuy Posted March 6, 2021 Share Posted March 6, 2021 13 hours ago, ULTIMA said: Just when I thought the Potvin replica sets would stop... Now you don’t only have to worry about Potvin but graphics like larceny and revoke can come back this will be what I’m ordering in a year or so. The thinnest black lines are intended to be stitching so I have a reference to use padskinz on. Link to comment Share on other sites More sharing options...
Puckstopper Posted March 8, 2021 Share Posted March 8, 2021 On 3/5/2021 at 7:20 PM, ThatCarGuy said: How’s this? I meant on the timing of digital printing. According to the manager of the store I work at our CCM rep is more optimistic on availability this year. However, my source is secondhand from a rep who's job is to be upbeat about the product. I'm not saying I don't believe the manager, the rep, or you. TBH I'm debating skipping EF5 and waiting on printed gear, so I was just curious where you were hearing 2022. Link to comment Share on other sites More sharing options...
ThatCarGuy Posted March 8, 2021 Share Posted March 8, 2021 1 hour ago, Puckstopper said: I meant on the timing of digital printing. According to the manager of the store I work at our CCM rep is more optimistic on availability this year. However, my source is secondhand from a rep who's job is to be upbeat about the product. I'm not saying I don't believe the manager, the rep, or you. TBH I'm debating skipping EF5 and waiting on printed gear, so I was just curious where you were hearing 2022. Also heard 2022 from CCM’s Instagram. Apparently they’re still putting the finishing touches on the clear coat and deciding which material needs to go under the clear. For those of us with access to reps who knows we may get it sooner Link to comment Share on other sites More sharing options...
TheGoalNet Posted March 8, 2021 Share Posted March 8, 2021 On 3/5/2021 at 6:20 PM, ThatCarGuy said: How’s this? You can order a 580, a Potvin, or a Roy. When you put in your graphic request, you will need to ask for it or present a mock up. CCM is not planning on having a library of the retro graphics. @Chenner29 - Heaton / Koho / RBK / Reebok / CCM always owned the graphic piecces of it. All of Lefevre pieces are cut by a die and not a CNC. There is no issue I am aware of with Lefevre owning a graphic or file. Link to comment Share on other sites More sharing options...
A.YOUNGoalie13 Posted March 9, 2021 Share Posted March 9, 2021 I just want my damn koho 580 two-piece. Same one hiller wore. It can have any damn graphic you like Link to comment Share on other sites More sharing options...
CJ Boiss Posted March 9, 2021 Share Posted March 9, 2021 2 hours ago, A.YOUNGoalie13 said: I just want my damn koho 580 two-piece. Same one hiller wore. It can have any damn graphic you like I'd bet that the Flames equipment sale still has Hiller's old gloves. Guys almost never buy the full-right stuff, and there were three or four sets there a few years ago. Link to comment Share on other sites More sharing options...
![THE GOAL[ie] NET[work]](http://content.invisioncic.com/r274873/monthly_2018_03/logo-02.png.d6f61971ea123d3bfb039f976a1ffe77.png){kind=logo}
Recommended Posts
Archived
This topic is now archived and is closed to further replies.