mr_shifty1982 Posted September 15, 2020 Share Posted September 15, 2020 (edited) 1 hour ago, BadAngle41 said: Gold on Gold on Gold!! I don't recall... was Pure Gold only available as SpeedSkin? Anxious to hear your impressions once you get them on the ice. Pure pure gold, pics do no justice it looks unreal. They have antique gold as well but went with these and glad I did. The other gold looks more bronze to me. I had a few ice sessions, definitely feel stiffer than the P2, will take time getting used too, just loved those P2s so much. Rebounds are harder. Love the game ready glove it's a first vs the pro, and pucks fly off the blocker. Slides better too. Pad seems to sit a little higher, going to try loose everything as much as I can. They are 33 plus 1.5. Funny thing is that I got my new skates on the ice with these for the first time, they screwed up my first sharp because the black steel coating was on and I was sliding, went to another shop and they didn't fix it lol I had 2 uncomfortable games so Friday now will be good. Edited September 15, 2020 by mr_shifty1982 Quote Link to comment Share on other sites More sharing options...
creasecollector Posted September 15, 2020 Share Posted September 15, 2020 2 hours ago, mr_shifty1982 said: Yes. 1 Quote Link to comment Share on other sites More sharing options...
coopaloop1234 Posted September 15, 2020 Share Posted September 15, 2020 2 minutes ago, creasecollector said: Yes. No? 1 Quote Link to comment Share on other sites More sharing options...
Quadzilla32 Posted September 15, 2020 Share Posted September 15, 2020 8 minutes ago, mr_shifty1982 said: Pure pure gold, pics do no justice it looks unreal. They have antique gold as well but went with these and glad I did. The other gold looks more bronze to me. I had a few ice sessions, definitely feel stiffer than the P2, will take time getting used too, just loved those P2s so much. Rebounds are harder. Love the game ready glove it's a first vs the pro, and pucks fly off the blocker. Slides better too. Pad seems to sit a little higher, going to try loose everything as much as I can. They are 33 plus 1.5. Funny thing is that I got my new skates on the ice with these for the first time, they screwed up my first sharp because the black steel coating was on and I was sliding, went to another shop and they didn't fix it lol I had 2 uncomfortable games so Friday now will be good. Did they not cross grind the new skates? I just got fresh steel for my skates and only time I get to use them is for games so I’m a little worried about getting fresh steel and then going straight to a game with them. 1 Quote Link to comment Share on other sites More sharing options...
mr_shifty1982 Posted September 15, 2020 Share Posted September 15, 2020 22 minutes ago, Quadzilla32 said: Did they not cross grind the new skates? I just got fresh steel for my skates and only time I get to use them is for games so I’m a little worried about getting fresh steel and then going straight to a game with them. I thought they would right, a pro goalie shop lol and went for fixing at another ahhhh I think with regular steel you're fine, or at least I hope. These are black. Quote Link to comment Share on other sites More sharing options...
Quadzilla32 Posted September 15, 2020 Share Posted September 15, 2020 6 minutes ago, mr_shifty1982 said: I thought they would right, a pro goalie shop lol and went for fixing at another ahhhh I think with regular steel you're fine, or at least I hope. These are black. Ya I picked up some blacksteel, I might have to be the annoying customer who asks them if they did their job. Quote Link to comment Share on other sites More sharing options...
mr_shifty1982 Posted September 15, 2020 Share Posted September 15, 2020 Just now, Quadzilla32 said: Ya I picked up some blacksteel, I might have to be the annoying customer who asks them if they did their job. You should lol after the 3rd try I snuck into a rink and took a lap to make sure it's good during the afternoon. Quote Link to comment Share on other sites More sharing options...
A.YOUNGoalie13 Posted September 16, 2020 Share Posted September 16, 2020 10 hours ago, Quadzilla32 said: New to me, picked up some step blacksteel brand new for an awesome price. haven’t been able to find runners Did you paint your cowlings and holders? Quote Link to comment Share on other sites More sharing options...
Quadzilla32 Posted September 16, 2020 Share Posted September 16, 2020 4 hours ago, A.YOUNGoalie13 said: Did you paint your cowlings and holders? Nope, everything is stock except the runners now. I know I have seen other skates that have white accents and I forget if these were special edition or anything. I’ve had them for so long I can’t remember. Quote Link to comment Share on other sites More sharing options...
BadAngle41 Posted September 16, 2020 Share Posted September 16, 2020 14 hours ago, Quadzilla32 said: Ya I picked up some blacksteel, I might have to be the annoying customer who asks them if they did their job. 14 hours ago, mr_shifty1982 said: You should lol after the 3rd try I snuck into a rink and took a lap to make sure it's good during the afternoon. Interesting. I've used Tydan's DLC and Bauer's LS5G w/ Carbon coating and never had an issue with sharpening. Then again... maybe my mom was right... maybe i am special. 2 Quote Link to comment Share on other sites More sharing options...
BadAngle41 Posted September 16, 2020 Share Posted September 16, 2020 15 hours ago, mr_shifty1982 said: Pure pure gold, pics do no justice it looks unreal. They have antique gold as well but went with these and glad I did. The other gold looks more bronze to me. I had a few ice sessions, definitely feel stiffer than the P2, will take time getting used too, just loved those P2s so much. Rebounds are harder. Love the game ready glove it's a first vs the pro, and pucks fly off the blocker. Slides better too. Pad seems to sit a little higher, going to try loose everything as much as I can. They are 33 plus 1.5. I'd agree on the pad sitting higher as well. While I did go with my usual 33" (+1) and its playing very well... If I didn't have a boot strap it may have been another story. Also getting used to wearing the pad a little more loose than I usually would. Kind of a balancing act between loose enough to rotate and play well... but tight enough to feel connected. I did slap on some new Hybrid Armour ProLaces as well (1" gap) and that has helped too. Quote Link to comment Share on other sites More sharing options...
Quadzilla32 Posted September 16, 2020 Share Posted September 16, 2020 50 minutes ago, BadAngle41 said: Interesting. I've used Tydan's DLC and Bauer's LS5G w/ Carbon coating and never had an issue with sharpening. Then again... maybe my mom was right... maybe i am special. I haven’t sharpened mine yet so I’ll see if I have similar experience or not. I think if the shop knows what it’s doing you should be gtg. did you have your carbon blades cross ground the first time? I’ve read mixed things saying if you have higher quality steel you don’t need to get it done since the main purpose of it is to ensure the profile is even on both blades and tor ale off any imperfections. Quote Link to comment Share on other sites More sharing options...
BadAngle41 Posted September 16, 2020 Share Posted September 16, 2020 56 minutes ago, Quadzilla32 said: I haven’t sharpened mine yet so I’ll see if I have similar experience or not. I think if the shop knows what it’s doing you should be gtg. did you have your carbon blades cross ground the first time? I’ve read mixed things saying if you have higher quality steel you don’t need to get it done since the main purpose of it is to ensure the profile is even on both blades and tor ale off any imperfections. I had NoIcingSports blade match prior to profiling on both the Tydans and Bauer LS5G steels. Not 100% sure on their process but I'd assume they cross grind when doing the blade matching. Quote Link to comment Share on other sites More sharing options...
ThatCarGuy Posted September 16, 2020 Share Posted September 16, 2020 18 hours ago, coopaloop1234 said: No? Perhaps 1 Quote Link to comment Share on other sites More sharing options...
creasecollector Posted September 16, 2020 Share Posted September 16, 2020 40 minutes ago, ThatCarGuy said: Perhaps Maybe. Quote Link to comment Share on other sites More sharing options...
coopaloop1234 Posted September 16, 2020 Share Posted September 16, 2020 6 minutes ago, creasecollector said: Maybe. Indubitably 1 Quote Link to comment Share on other sites More sharing options...
dstew29 Posted September 17, 2020 Share Posted September 17, 2020 9 hours ago, coopaloop1234 said: Indubitably One more and this mini thread gets moved to Lifestyle > Potpourri > Non sequitors 2 Quote Link to comment Share on other sites More sharing options...
CJ Boiss Posted September 17, 2020 Share Posted September 17, 2020 48 minutes ago, dstew29 said: One more and this mini thread gets moved to Lifestyle > Potpourri > Non sequitors Quite. 1 Quote Link to comment Share on other sites More sharing options...
mr_shifty1982 Posted September 17, 2020 Share Posted September 17, 2020 33 minutes ago, CJ Boiss said: Quite. It's always the kid playing with the Fisher Price toys that starts Quote Link to comment Share on other sites More sharing options...
rlwillis33 Posted September 17, 2020 Share Posted September 17, 2020 New set came today 8 Quote Link to comment Share on other sites More sharing options...
mr_shifty1982 Posted September 17, 2020 Share Posted September 17, 2020 More Axis 1 Quote Link to comment Share on other sites More sharing options...
ThatCarGuy Posted September 17, 2020 Share Posted September 17, 2020 23 minutes ago, mr_shifty1982 said: More Axis Should’ve gone for the black base colorway Anyways it you’re anything like me you’ll love that stick it’s so much better than previous ccm composites Quote Link to comment Share on other sites More sharing options...
mr_shifty1982 Posted September 17, 2020 Share Posted September 17, 2020 (edited) 59 minutes ago, ThatCarGuy said: Should’ve gone for the black base colorway Anyways it you’re anything like me you’ll love that stick it’s so much better than previous ccm composites Well, I could have BUT I like the square toe and found this for 250 Canadian. My team colours going navy too so it was a win win, plus remember I just got a gold set? Few days ago sold my used P2 and Eflex4 so I needed a stick lol Edited September 17, 2020 by mr_shifty1982 1 Quote Link to comment Share on other sites More sharing options...
HamelinGraphix Posted September 18, 2020 Share Posted September 18, 2020 On 9/15/2020 at 10:29 AM, mikemc620 said: Why did you go with a custom pro G3 versus something newer? clearance deal from Goaliemonkey was too good to pass. Quote Link to comment Share on other sites More sharing options...
BadAngle41 Posted September 18, 2020 Share Posted September 18, 2020 19 hours ago, rlwillis33 said: New set came today They look great!! I like that you changed up the color zones in the glove and blocker away from the black outer roll. I was a bit of a slave to that. Wanted to keep a black outside edge on each piece. Was it just an aesthetic decision for you or playing with shooter’s visual? But Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.