Adam Cooper Posted October 17, 2018 Share Posted October 17, 2018 33 minutes ago, Math. said: Pictures?........pleeeease. I'm looking into ordering one myself. I provided pics of the Star Wars art and my team logo. They then work on sizing and fit. But you need to specify where each pic goes on the mask. Hope this helps. 6 Quote Link to comment Share on other sites More sharing options...
beansbats Posted October 17, 2018 Share Posted October 17, 2018 New to me 2S set. WHL Returns. I think I'll wear them for the first time in a game tonight 2 Quote Link to comment Share on other sites More sharing options...
Chester Posted October 17, 2018 Share Posted October 17, 2018 1 hour ago, Adam Cooper said: I provided pics of the Star Wars art and my team logo. They then work on sizing and fit. But you need to specify where each pic goes on the mask. Hope this helps. Did you have to heat and stretch any of it? Howd you cut the holes? Quote Link to comment Share on other sites More sharing options...
Adam Cooper Posted October 17, 2018 Share Posted October 17, 2018 2 minutes ago, Chester said: Did you have to heat and stretch any of it? Howd you cut the holes? Yes, you’ll need a hair dryer and an X-Acto Knife to cut those holes. Need to be very careful. Do this on a day you have lots of patience as this will take 2-3 hours. Quote Link to comment Share on other sites More sharing options...
Chester Posted October 17, 2018 Share Posted October 17, 2018 (edited) 1 minute ago, Adam Cooper said: Yes, you’ll need a hair dryer and an X-Acto Knife to cut those holes. Need to be very careful. Do this on a day you have lots of patience as this will take 2-3 hours. HA!! Edited October 17, 2018 by Chester Quote Link to comment Share on other sites More sharing options...
goalie381 Posted October 17, 2018 Share Posted October 17, 2018 49 minutes ago, beansbats said: New to me 2S set. WHL Returns. I think I'll wear them for the first time in a game tonight Nice looking set, have fun out there tonight. New gear nights can be awkward. Quote Link to comment Share on other sites More sharing options...
TitanG Posted October 17, 2018 Share Posted October 17, 2018 3 hours ago, Adam Cooper said: I provided pics of the Star Wars art and my team logo. They then work on sizing and fit. But you need to specify where each pic goes on the mask. Hope this helps. Awesome result! I assume they come as multiple pieces instead of just one sheet? 1 Quote Link to comment Share on other sites More sharing options...
Adam Cooper Posted October 18, 2018 Share Posted October 18, 2018 Yes, they provide two sheets and each of the pieces have been cut for you. Thanks for the complements! I wish I could have 2-3 masks to rotate. If I had the choice I would go with the following art: 1. Venom or Carnage - get a black mask with Venom decals 2. Go Retro 80's with Robotech theme - get some pics of Veritechs, skull and cross bones logo for Skull 1 etc. 3. Aliens - Predator Mask 1 Quote Link to comment Share on other sites More sharing options...
ThatCarGuy Posted October 18, 2018 Share Posted October 18, 2018 (edited) Here's my old helmet: And a pic of my pads with my new sticks Edited October 18, 2018 by ThatCarGuy Quote Link to comment Share on other sites More sharing options...
Doobiesnax Posted October 18, 2018 Share Posted October 18, 2018 Late night snag, future pro return from Zach Sawchenko.... 1 Quote Link to comment Share on other sites More sharing options...
Doobiesnax Posted October 18, 2018 Share Posted October 18, 2018 6 minutes ago, ThatCarGuy said: Here's my old helmet: what the shit is going on with that strap on your chin? 1 2 Quote Link to comment Share on other sites More sharing options...
BadAngle41 Posted October 18, 2018 Share Posted October 18, 2018 19 hours ago, beansbats said: New to me 2S set. WHL Returns. I think I'll wear them for the first time in a game tonight I'm jealous @beansbats... great looking set and condition looks to just as good too. Based on your profile pic you're a Bauer user already... but what have you used otherwise? I've been looking for a set to mess around with but haven't had much luck. Being wrong handed and likely taller than me gives you some distinct advantages in the search. Should be getting a demo set from GoalieMonkey next week... but it's only for a week. My curiosity w/ the Bauer lines is that they are very different from what I've used in terms of the stiffness and rebounds. Currently in a set of 3 year old Retroflexes... but anxious to see how I feel about bigger rebounds. Quote Link to comment Share on other sites More sharing options...
BadAngle41 Posted October 18, 2018 Share Posted October 18, 2018 20 hours ago, Adam Cooper said: I provided pics of the Star Wars art and my team logo. They then work on sizing and fit. But you need to specify where each pic goes on the mask. Hope this helps. Great selection on the images and application! In my limited experience in applying vinyl... the smaller the piece and the fewer the curves the better. Were Boba Fett and the Storm Trooper their own individual decals applied over the stripes or were they a single merged with the striping as a single large piece? Quote Link to comment Share on other sites More sharing options...
Lucky Pucker Posted October 18, 2018 Share Posted October 18, 2018 30 minutes ago, BadAngle41 said: Great selection on the images and application! In my limited experience in applying vinyl... the smaller the piece and the fewer the curves the better. Were Boba Fett and the Storm Trooper their own individual decals applied over the stripes or were they a single merged with the striping as a single large piece? Yes - I wondered the same thing, actually! I have a bit of extra - as well as numbers - from mine, and considered vinyl-on-vinyl, but wasn't sure how well it would work. 1 Quote Link to comment Share on other sites More sharing options...
ThatCarGuy Posted October 18, 2018 Share Posted October 18, 2018 (edited) 1 hour ago, Doobiesnax said: what the shit is going on with that strap on your chin? I knew someone was going to ask about that! I have a small face (my face is so small that I run the chin cup in the 950X upside down) and it kept bothering the underside of my jaw so I put it there instead. I didn't want to cut the strap any shorter. The chin cup also fit better that way because there was less material between it and the shell. Edited October 18, 2018 by ThatCarGuy Quote Link to comment Share on other sites More sharing options...
BadAngle41 Posted October 18, 2018 Share Posted October 18, 2018 14 minutes ago, Lucky Pucker said: Yes - I wondered the same thing, actually! I have a bit of extra - as well as numbers - from mine, and considered vinyl-on-vinyl, but wasn't sure how well it would work. I'm sure it would adhere fine... but if you're OCD like me the additional decal edges (and minor bump from the overlap underneath) would drive me nuts. I suppose you could do a dry fit... trim away on the existing where it wold overlap... then apply. Quote Link to comment Share on other sites More sharing options...
daffy Posted October 18, 2018 Share Posted October 18, 2018 New chesty. Quote Link to comment Share on other sites More sharing options...
Babylon93 Posted October 18, 2018 Share Posted October 18, 2018 Rxs Mercury 68 Pro Goalie Mask by airxess ( now built by Ortho-Team Mattle AG in Solothurn) Very light and comfortable i love it 2 Quote Link to comment Share on other sites More sharing options...
cwarnar Posted October 18, 2018 Share Posted October 18, 2018 23 minutes ago, Babylon93 said: Rxs Mercury 68 Pro Goalie Mask by airxess ( now built by Ortho-Team Mattle AG in Solothurn) Very light and comfortable i love it No vent holes? Quote Link to comment Share on other sites More sharing options...
TitanG Posted October 18, 2018 Share Posted October 18, 2018 24 minutes ago, Babylon93 said: Rxs Mercury 68 Pro Goalie Mask by airxess ( now built by Ortho-Team Mattle AG in Solothurn) Very light and comfortable i love it You'll have to review it! I'm sure @TheGoalNet and others (including myself) will want to hear about it. 1 hour ago, daffy said: New chesty. I have one on order! Quote Link to comment Share on other sites More sharing options...
dstew29 Posted October 18, 2018 Share Posted October 18, 2018 Nice! Logo-less looks really...CLEAN 2 hours ago, TitanG said: I have one on order! Me too! Supposed to get mine within a week so that would be +/- 9 weeks end to end with some mods. 1 Quote Link to comment Share on other sites More sharing options...
Adam Cooper Posted October 18, 2018 Share Posted October 18, 2018 6 hours ago, Lucky Pucker said: Yes - I wondered the same thing, actually! I have a bit of extra - as well as numbers - from mine, and considered vinyl-on-vinyl, but wasn't sure how well it would work. So Custom Cages incorporates your images with those stripes etc. So no overlapping to make it look cheap and unprofessional. But I will say I do have one piece that overlaps slightly that you can barely notice. It also has had no issues with adhesion. Hope that helps in your decision. For the price, value, look and durability you can’t go wrong. I’ll never pay big bucks for a painted mask. Quote Link to comment Share on other sites More sharing options...
Max27 Posted October 18, 2018 Share Posted October 18, 2018 7 hours ago, ThatCarGuy said: I knew someone was going to ask about that! I have a small face (my face is so small that I run the chin cup in the 950X upside down) and it kept bothering the underside of my jaw so I put it there instead. I didn't want to cut the strap any shorter. The chin cup also fit better that way because there was less material between it and the shell. cut it off. had the same issue with my 7700 Quote Link to comment Share on other sites More sharing options...
daffy Posted October 19, 2018 Share Posted October 19, 2018 7 hours ago, daffy said: New chesty. Maybe i should clarify....this is my new Boddam chesty. Quote Link to comment Share on other sites More sharing options...
TitanG Posted October 19, 2018 Share Posted October 19, 2018 3 minutes ago, daffy said: Maybe i should clarify....this is my new Boddam chesty. Wow ok, it just looks exactly like a logoless Passau. Any association between Boddam and Passau or is Boddam just taking some major inspiration? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.