Drew37 Posted August 12, 2018 Share Posted August 12, 2018 (edited) 38 minutes ago, SaveByRichter35 said: Thanks Naz. Its the Harrison/Potvin mold. It looks off to me though. I'm not 100% happy with the pictures I have seen of it thus far. I think it looks a bit off because it's white with a stainless steel cage. If it was coloured/painted with the white window and a white cage it would look like the picture below or really close to it. Edited August 12, 2018 by Drew37 Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted August 12, 2018 Share Posted August 12, 2018 17 minutes ago, Drew37 said: I think it looks a bit off because it's white with a stainless steel cage. If it was coloured/painted with the white window and a white cage it would look like the picture below or really close to it. I know white mask with polished cage and black harness looks a little odd but I had the end product in mind when I asked for said colors. It will all come together eventually lol. With that said, its the way the ear and cheek line are cut out. It just looks off to me. Angles look wrong to me. Quote Link to comment Share on other sites More sharing options...
Naz Posted August 13, 2018 Share Posted August 13, 2018 18 hours ago, SaveByRichter35 said: Thanks Naz. Its the Harrison/Potvin mold. It looks off to me though. I'm not 100% happy with the pictures I have seen of it thus far. I get what you are saying. The back edge of the mask behind the ear vents needs to extend just a little lower before the transition angle towards the jaw. The triangle vents always look just a liiiiittle off on these masks. The edges of the vents that are parallel to each other over the ears need to be just a touch longer as well. But still, looks 1000 times better than the round holes. Cage choice is awesome too. I prefer the look of the double bar like you have there. Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted August 13, 2018 Share Posted August 13, 2018 37 minutes ago, Naz said: I get what you are saying. The back edge of the mask behind the ear vents needs to extend just a little lower before the transition angle towards the jaw. The triangle vents always look just a liiiiittle off on these masks. The edges of the vents that are parallel to each other over the ears need to be just a touch longer as well. But still, looks 1000 times better than the round holes. Cage choice is awesome too. I prefer the look of the double bar like you have there. Exactly what I am talking about. Edit - My wife just text me and said I have a package from Michel. I get out of work in 2 hours. 2 Quote Link to comment Share on other sites More sharing options...
TheGoalNet Posted August 13, 2018 Share Posted August 13, 2018 4 hours ago, SaveByRichter35 said: Exactly what I am talking about. Edit - My wife just text me and said I have a package from Michel. I get out of work in 2 hours. Im pretty sure you have some sort of souped up Honda... don't get a ticket on the ride home!!! Quote Link to comment Share on other sites More sharing options...
Big2 Posted August 13, 2018 Share Posted August 13, 2018 (edited) 8 hours ago, SaveByRichter35 said: Exactly what I am talking about. Edit - My wife just text me and said I have a package from Michel. I get out of work in 2 hours. anxiously waiting for a picture? Edited August 14, 2018 by Big2 Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted August 14, 2018 Share Posted August 14, 2018 18 hours ago, TheGoalNet said: Im pretty sure you have some sort of souped up Honda... don't get a ticket on the ride home!!! Hahaha good memory. It was an Acura RSX but I sold that back in December. 17 hours ago, Big2 said: anxiously waiting for a picture? They're a few posts back. Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted August 14, 2018 Share Posted August 14, 2018 After having it in person it is not as off as it appeared to be in the pictures that Michel sent me. I am very happy with it. 2 Quote Link to comment Share on other sites More sharing options...
bunnyman666 Posted August 14, 2018 Author Share Posted August 14, 2018 10 minutes ago, SaveByRichter35 said: After having it in person it is not as off as it appeared to be in the pictures that Michel sent me. I am very happy with it. You going to have @coopaloop1234‘s face airbrushed on this new helmet? 1 Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted August 14, 2018 Share Posted August 14, 2018 4 minutes ago, bunnyman666 said: You going to have @coopaloop1234‘s face airbrushed on this new helmet? No its already on my jock. This one is getting the Jonathan Quick treatment to match my beer league team, the Knights. 1 1 Quote Link to comment Share on other sites More sharing options...
coopaloop1234 Posted August 14, 2018 Share Posted August 14, 2018 (edited) 4 minutes ago, SaveByRichter35 said: No its already on my jock. This one is getting the Jonathan Quick treatment to match my beer league team. Inside or out? Also, careful, you may anger some with the copypasta. Edited August 14, 2018 by coopaloop1234 Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted August 14, 2018 Share Posted August 14, 2018 Just now, coopaloop1234 said: Inside or out? Both 1 Quote Link to comment Share on other sites More sharing options...
coopaloop1234 Posted August 14, 2018 Share Posted August 14, 2018 1 minute ago, SaveByRichter35 said: Both o bb Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted August 14, 2018 Share Posted August 14, 2018 1 minute ago, coopaloop1234 said: Inside or out? Also, careful, you may anger some with the copypasta. I give no fucks Quote Link to comment Share on other sites More sharing options...
Big2 Posted August 14, 2018 Share Posted August 14, 2018 2 hours ago, SaveByRichter35 said: After having it in person it is not as off as it appeared to be in the pictures that Michel sent me. I am very happy with it. Very nice! Have not been following the thread - fiberglass/glass + kevlar/full kevlar? Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted August 14, 2018 Share Posted August 14, 2018 1 minute ago, Big2 said: Very nice! Have not been following the thread - fiberglass/glass + kevlar/full kevlar? Full Kevlar 2 Quote Link to comment Share on other sites More sharing options...
TheGoalNet Posted August 14, 2018 Share Posted August 14, 2018 2 hours ago, SaveByRichter35 said: Full Kevlar Any chance you will have Eye Candy do the Quick mask? Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted August 14, 2018 Share Posted August 14, 2018 3 minutes ago, TheGoalNet said: Any chance you will have Eye Candy do the Quick mask? Quote Link to comment Share on other sites More sharing options...
Taco Posted August 17, 2018 Share Posted August 17, 2018 On 8/14/2018 at 12:20 PM, SaveByRichter35 said: After having it in person it is not as off as it appeared to be in the pictures that Michel sent me. I am very happy with it. What chin length did you go with here for the Potvin? I still have time to figure things out but I like the length displayed here. Quote Link to comment Share on other sites More sharing options...
SaveByRichter35 Posted August 17, 2018 Share Posted August 17, 2018 18 minutes ago, Taco said: What chin length did you go with here for the Potvin? I still have time to figure things out but I like the length displayed here. The chin itself is 3" I think but he asked for a measurement from the top of the face opening to the bottom of the chin. Let me go back and check my emails with him and get you exactly what I gave him. Edit - Top of Cage Opening to Bottom of Chin: 8.25in/21cm Quote Link to comment Share on other sites More sharing options...
daffy Posted August 19, 2018 Share Posted August 19, 2018 Anyone have a proetchsport for sale by chance? All fiberglass is fine. Need a backup mask while mine heads back to Michel for repair (again). Theodore mold ideally. Quote Link to comment Share on other sites More sharing options...
jayluv54 Posted September 29, 2018 Share Posted September 29, 2018 Happy to finally get this guy today. So I was considering a 961 because I always wanted one that actually fit right, but because my head mold matched Potvins exactly, Michel talked me into this one. He was psyched to make another Potvin straight from Felix's original mold and shell. The Green paint happened to be left over from a Luongo mask he made back in the day too, so pretty cool story behind this one. 3 Quote Link to comment Share on other sites More sharing options...
bunnyman666 Posted September 29, 2018 Author Share Posted September 29, 2018 4 minutes ago, jayluv54 said: Happy to finally get this guy today. So I was considering a 961 because I always wanted one that actually fit right, but because my head mold matched Potvins exactly, Michel talked me into this one. He was psyched to make another Potvin straight from Felix's original mold and shell. The Green paint happened to be left over from a Luongo mask he made back in the day too, so pretty cool story behind this one. Dig the history AND the finished product! 1 Quote Link to comment Share on other sites More sharing options...
MangoRhinehart Posted September 29, 2018 Share Posted September 29, 2018 That is awesome, I was considering getting a full kevlar, in the near future. I lucked into a Wall10 and that is has pushed my timeline back a bit. 1 Quote Link to comment Share on other sites More sharing options...
motowngoalie Posted September 30, 2018 Share Posted September 30, 2018 @jayluv54 sweet mask! Still waiting for mine, hoping for November. Question, what was the additional charge to have Michel paint your mask? 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.